Datasheet4U Logo Datasheet4U.com

ELM405 - Rotary Decoder

Description

The ELM405 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices.

The low power CMOS technology used ensures that only a very small current is required over the entire 2.

Features

  • Low power CMOS design Wide supply range.
  • 2.0 to 5.5 volts Complete debouncing of the encoder inputs No external filtering needed 4x decoding Startup delay timer High current drive outputs Connection Diagram PDIP and SOIC (top view) VDD A 1 2 3 4 8 7 6 5 VSS CS Clk U/D.

📥 Download Datasheet

Datasheet Details

Part number ELM405
Manufacturer ELM
File Size 78.50 KB
Description Rotary Decoder
Datasheet download datasheet ELM405 Datasheet

📁 Similar Datasheet

Other Datasheets by ELM

Full PDF Text Transcription

Click to expand full text
ELM405 Rotary Decoder - 3 wire 4x Interface Description The ELM405 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. There is no need for external filtering or debounce circuits with the ELM405, as this is all performed within the integrated circuit. After debouncing the encoder signals, the ELM405 determines the direction of shaft rotation, and then generates the appropriate outputs. The polarity of the clock output can be changed at any time to accommodate different needs.
Published: |