25Q80A Datasheet 8 Megabit Serial Flash Memory

Manufacturer: ESMT (Elite Semiconductor Microelectronics Technology)

25Q80A 8 megabit serial flash memory by ESMT (Elite Semiconductor Microelectronics Technology) - Datasheet Preview

Datasheet Details

Part number	25Q80A
Manufacturer	ESMT (Elite Semiconductor Microelectronics Technology)
File Size	1.05 MB
Description	8 Megabit Serial Flash Memory
Datasheet	25Q80A Datasheet

General Description

The EN25Q80A is an 8 Megabit (1024K-byte) Serial Flash memory, with advanced write protection mechanisms.

The EN25Q80A supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output as well as Quad I/O using SPI pins: Serial Clock, Chip Select, Serial DQ0(DI), DQ1(DO), DQ2(WP#) and DQ3(NC).

SPI clock frequencies of up to 80MHz are supported allowing equivalent clock rates of 160MHz for Dual Output and 320MHz for Quad Output when using the Dual/Quad Output Fast Read instructions.

Overview

EN25Q80A EN25Q80A 8 Megabit Serial Flash Memory with 4Kbyte Uniform.

Key Features

Single power supply operation - Full voltage range: 2.7-3.6 volt.
Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3.
8 M-bit Serial Flash - 8 M-bit/1024 K-byte/4096 pages - 256 bytes per programmable page.
Standard, Dual or Quad SPI Standard SPI: CLK, CS#, DI, DO, WP# Dual SPI: CLK, CS#, DQ0, DQ1, WP# Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 High performance 100MHz clock rate for one data bit 80MHz clock rate for two data bits 80MHz cl.

📁 Similar Datasheet

Part Number	Description	Manufacturer
25Q80	32M-BIT SERIAL FLASH MEMORY	Winbond
25Q80BLIG	2.5V 8M-BIT SERIAL FLASH MEMORY	Winbond
25Q80BLNIG	2.5V 8M-BIT SERIAL FLASH MEMORY	Winbond
25Q80BLSIG	2.5V 8M-BIT SERIAL FLASH MEMORY	Winbond
25Q80BLVIG	2.5V 8M-BIT SERIAL FLASH MEMORY	Winbond

More Datasheets from ESMT (Elite Semiconductor Microelectronics Technology)

Part Number	Description