B32356 Datasheet | EPCOS

Features .. - - - - - - Self-healing properties Low dissipation factor P2 safety class to IEC 60252-1 2001-02 High insulation resistance Case IP 53 protected IEC/EN 60335 patible Typical applications - For general sine wave applications, mainly as motor run capacitor Terminals - Twin core cable type PP 2 × 0.50 mm2, 600 V, 95 °C - Connectors on request Mounting parts (optional) - Threaded stud at bottom of can (M8, max. torque = 5 Nm) - Locking clip for mounting into a hole of Ø 8 mm Technical data and specifications Reference standards Safety class to IEC 60252-1 2001-02 Life expectancy to IEC 60252 2001 Rated capacitance CR Tolerance Rated voltage VR Rated frequency f R Maximum ratings Maximum permissible voltage Vmax Maximum permissible current Imax 1.1 - VR 1.3 - IR (VR= rated voltage) (IR= rated current) IEC 60252-1 2001-02 / EN 60252 2001 P2 400 V/85 °C: 450 V/85 °C: 2 20 µF ±5%, other tolerances upon request 400 V AC, 450 V AC 50/60 Hz 30000 h (class A) 10000 h (class B) FK PC PM AC Please read the important notes, cautions and warnings. Page 2 of 6 January 2008 Film capacitors - AC capacitors Motor run capacitors - Motor Cap™ P2 pact Test data AC test voltage terminal to terminal VTT Insulation resistance Rins or time constant τ at 20 °C, rel. Humidity ≤ 65% (minimum as-delivered values) .. - VR, 2 s 3000 s Dissipation factor tan δ at 20 °C Maximum rate of voltage rise d V/dtmax Climatic data Climatic category Lower category Tmin Upper category Tmax Damp heat test ttest Mechanical and thermal properties Ball pressure test to IEC 60309-1 sec. 27.3 Plastic can and top disk material - UL 94 V2 patible - Glow wire test to IEC 60695-2-1/0 and -2-1/1 Test temperature 550 °C for IR ≤ 0.5 A Test temperature 750 °C for IR > 0.5 A ≤ 1.0 - 10-3 (120 Hz) 10 V/μs...