B82412-Axxx Datasheet | EPCOS

Features s s s s Low height High Q factor High resonance frequency Suitable for reflow (IR and vapor phase) and wave soldering Applications s Filtering of supply voltages, coupling, decoupling s Antenna systems .. s Automotive electronics s Telemunications Terminals s s s s s Silver-plated 1- 2 µm Cu, 4- 6 µm Ag Base material Cu Sn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking No marking on ponent Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel For details on taping, packing and packing units see page 153 04/00 SMT Inductors, SIMID Series SIMID 1210-01 General technical data Rated inductance LR Q factor Qmin Rated current IR B82412-A Measured with impedance analyzer HP 4194A at frequency f L Measured with impedance analyzer HP 4194A/HP 4291A at frequency f Q Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 85 °C Measured with network analyzer HP 8753 Measured at 20 °C ambient temperature, measuring current < IR In accordance with IEC 60068-1 55/125/56 (- 55 °C/+ 125 °C/56 days damp heat test) In accordance with IEC 60062-2-58 (215 ± 3) °C, (3 ± 0,3) s Wetting of soldering area: ≥ 95 % In accordance with IEC 60068-2-20 260 °C, 10 s ∆L /L ≤ ± 3 % 2 mm (100 mm long standard PCB) Approx. 40 mg Self-resonance frequency fres, min DC resistance Rmax Climatic category Solderability Resistance to soldering heat Permissible PCB bending Weight 04/00 SMT Inductors, SIMID Series SIMID 1210-01 Dimensional drawing 0,25 min. 1) 1,8 _ 0,3 1) B82412-A 1,6 _ 0,3 0,8 0,6±0,1 0,1±0,05 0,2 min. 1) 2,5±0,2 2,8±0,1 3,2+0,3 SSB0701-W Layout remendation SSB1227-Z Dimensions (mm) A Wave soldering Reflow soldering 2,3 2,7 1,60 1,15 2,1...