Datasheet4U Logo Datasheet4U.com

ETA6005 - 3MHz Switching Charger

Description

ETA6005 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting.

Features

  • Switching Charger with Power Path Management.
  • Up to 95% DC-DC Efficiency.
  • 50mΩ Power Path MOSFET.
  • Up to 2.5A Max charging current.
  • Instant on with a dead Battery or no Battery.
  • No battery detection.
  • No External Sense resistor.
  • Programmable USB and AC IN Charging Current.

📥 Download Datasheet

Datasheet Details

Part number ETA6005
Manufacturer ETA
File Size 741.02 KB
Description 3MHz Switching Charger
Datasheet download datasheet ETA6005 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ETA1483 18V High Efficiency Synchronous Step-Down Converter ETA solutions
ETA1485 18V High Efficiency Synchronous Step-Down Converter ETA solutions

Other Datasheets by ETA

Part Number Description
ETA6002 3MHz Switching Charger
ETA6003 3MHz Switching Charger
ETA6010 Precision Load Switch
ETA6011 5V/1A Constant Current Linear LED Driver
ETA6012 5V/1A High Brightness LED Driver

Full PDF Text Transcription

Click to expand full text
ETA6005 2.5A, 3MHz Switching Charger with Dynamic Power Path Management DESCRIPTION ETA6005 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected, depending on the battery voltage, the DC-DC switching regulator either pre-conditions, fast-charges the battery or just regulates a system voltage (VSYS) to a preset voltage. It does not require an external sense resistor for current sensing. The charging current is determined by programming ISET1 or ISET2 pin, depending on the state of the USB_DET. If USB_DET is low, indicating a valid AC adapter input is present, the charge current is set by ISET1; otherwise, it is set by ISET2. When the battery voltage reaches the termination voltage i.e. 4.
Published: |