900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






ETC

BE5982 Datasheet Preview

BE5982 Datasheet

Emergency Stop Module

No Preview Available !

Safety technique
Emergency stop module BE 5982
safemaster
· According to EU Directive for machines 98/37/EG
· According to EN 60 204-1, DIN VDE 0113 part 1 (11.98)
· Safety category 4 according to DIN EN 954-1
· Output: 2 NO contacts for AC 250 V
· Single-channel emergency stop circuit
· LED indication for channels 1 / 2 and operating state
· Short circuit protection
· Wire connection: also 2 x 1,5 mm2 stranded ferruled (isolated),
DIN 46 228-4 or
2 x 2,5 mm2 stranded ferruled DIN 46 228-1/-2/-3
· Width 22,5 mm
www.DataSheet4U.com
Function diagram
Approvals and marking
Pushbutton
On
Emergency
stop (Off)
K1
K2
M7218
Block diagram
A1(+)
Y1 Y2
PTC
K1
K2
K1
K2
Mains K1/K2 K1
K2
13 23
K1
K2
A2(-)
M6760_a
Circuit diagram
A1 13 23 24
A1 Y1
13
K1
K2
A2 Y2
14
14 Y1 Y2 A2
23
24
M7384_a
14 24
ET
Application
· Protection of persons and machines
· Emergency stop circuits on machines
Indication
LED power supply:
LED K1/K2:
on when operating voltage present
on when output relays K1, K2 are
energized
Notes
When using the E-stop module with "automatic start" mode, the automatic
restart (according to EN 60 204-1 part 9.2.5.4.2 and 10.8.3) has to be
inhibited by the machine control.
Technical data
Input
Nominal voltage UN:
Voltage range
at 10 % residual ripple:
at 48 % residual ripple:
Nominal consumption:
Control voltage Y1:
Control current:
Recovery time:
DC 24 V
DC 0,9 ... 1,1 UN
DC 0,8 ... 1,1 UN
approx. 1,6 W
DC 24 V
typ. DC 45 mA
0,5 s
Output
Contacts
BE 5982.02:
Response time:
Release time:
Contact type:
Output rated voltage:
Thermal current Ith:
Switching capacity
to AC 15:
Electrical life
to AC 15 at 2 A, AC 230 V:
Permissible switching
frequency:
Short ciruit strength
max. fuse rating:
Mechanical life:
2 NO contacts
max. 100 ms
max. 35 ms
Relay, positively driven
AC 250 V
see continuous limit curve
(max. 6 A in one contact path)
5 A / AC 230 V
for NO contact
2 A / AC 230 V
for NC contact
EN 60 947-5-1
EN 60 947-5-1
105 switching cycles EN 60 947-5-1
600 switching cycles / h
4 A gL
EN 60 947-5-1
10 x 106 switching cyles
All technical data in this list relate to the state at the moment of edition. We reserve the right
for technical improvements and changes at any time.
1
BE 5982 / 30.10.01 d




ETC

BE5982 Datasheet Preview

BE5982 Datasheet

Emergency Stop Module

No Preview Available !

Technical data
General data
Operating mode:
Temperature range:
Clearance and creepage
distances
overvoltage category /
contamination level:
EMC
Electrostatic discharge:
HF irradiation:
Fast transients:
Surge voltages
between
wires for power supply:
between wire and ground:
Interference suppression:
Degree of protection:
Housing:
www.DataSheet4U.com
Vibration resistance:
Climate resistance:
Terminal designation:
Wire connection:
Wire fixing:
Mounting:
Weight:
Dimensions
Width x height x depth:
Standard type
BE 5982.02 DC 24 V
Article number:
· Output:
· Nominal voltage UN:
· Width:
Characteristics
Continuous operation
- 15 ... + 55 °C
Application examples
4 kV / 2
8 kV (air)
10 V / m
4 kV
IEC 60 664-1
EN 61 000-4-2
EN 61 000-4-3
EN 61 000-4-4
1 kV
EN 61 000-4-5
2 kV
EN 61 000-4-5
Limit value class B
EN 55 011
Housing: IP 40
EN 60 529
Terminals: IP 20
EN 60 529
Thermoplastic with V0 behaviour
according to UL subject 94
Amplitude 0,35 mm
frequency 10 ... 55 Hz, EN 60 068-2-6
15 / 055 / 04
EN 60 068-1
EN 50 005
1 x 4 mm2 solid or
1 x 2,5 mm2 stranded ferruled (isolated)
or
2 x 1,5 mm2 stranded ferruled (isolated)
DIN 46 228-1/-2/-3/-4 or
2 x 2,5 mm2 stranded ferruled
DIN 46 228-1/-2/-3
Plus-minus terminal scews M3.5,
box terminal with wire protection
DIN rail
EN 50 022
170 g
Single-channel emergency stop circuit,
optionally with or without automatic On function.
Set jumper Y1 - Y2 for automatic On function.
The On button is omitted.
22,5 x 74 x 121 mm
0044292
2 NO contacts
DC 24 V
22,5 mm
stock item
Contact reinforcement by external contactors.
With switching currents > 5 A, the output contacts can be reinforced by
external contactors with positively-driven contacts. The function of the
external contactors is monitored by looping the NC contacts into the
switch-on circuit (terminals Y1 - Y2).
250
200
150
100
Continuous current limit curve
50
0
1 2 3 4 5 6 7 8 9 10
Switching current I [A]
M 6732
Limit curve for arc-free operation
for a resistive load
E. DOLD & SÖHNE KG • D-78114 Furtwangen • Postf. 1251 • Tel. +49 7723 654 0 • Telefax +49 7723 654 356
e-mail dold-relays@t-online.de • internet http://www.dold.com
2


Part Number BE5982
Description Emergency Stop Module
Maker ETC
PDF Download

BE5982 Datasheet PDF





Similar Datasheet

1 BE5982 Emergency Stop Module
ETC
2 BE5982.02 Emergency Stop Relay
ETC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy