900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






ETC

MS35489 Datasheet Preview

MS35489 Datasheet

Synthetic and Silicone Rubber

No Preview Available !

All original Text, Tables, and
Drawings are Copyright 1994-2006
reproduction by permission only.
Genuine Aircraft Hardware Co.
www.DataSheet4U.com
MS35489
Grommets, Synthetic and Silicone Rubber, Hot - Oil and Coolant Resistant
G
A
EC
E
Kits Available
F
TABLE I.
A
J
SPLIT AS SHOWN
WHEN REQUIRED
DASH NUMBERS AND DIMENSIONS
NOTES:
• PROCUREMENT SPECIFICATION: MIL-G-3036
• SUPERSEDES: MS35490 and AN931
• THIS INFORMATION FROM MILITARY STANDARD MS35489 PAGE 1 OF 3, REVISED FEB. 17, 1989,
SOME DETAILS MAY HAVE BEEN OMITTED FOR CLARITY.
Continued...
Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. 195




ETC

MS35489 Datasheet Preview

MS35489 Datasheet

Synthetic and Silicone Rubber

No Preview Available !

Genuine Aircraft Hardware Co.
All original Text, Tables, and
Drawings are Copyright 1994-2006
reproduction by permission only.
www.DataSheet4U.com
Continued...
MS35489
Grommets, Synthetic and Silicone Rubber,
Hot - Oil and Coolant Resistant
REQUIREMENTS:
1. MATERIAL:
RUBBER, SYNTHETIC, COMPOSITION A, IN ACCORDANCE WITH PROCUREMENT DOCUMENT, RUBBER, SILICONE,
COMPOSITION B, IN ACCORDANCE WITH PROCUREMENT DOCUMENT.
2. COLOR:
BLACK (COMPOSITION A). RED OR ORANGE (COMPOSITION B).
3. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A DASH NUMBER FROM TABLE I,
PLUS A MATERIAL CODE LETTER “X” FOR SILICONE RUBBER, NO CODE LETTER FOR SYNTHETIC RUBBER.
EXAMPLE:
MS35489-14 X
MATERIAL CODE
“X” - SILICONE RUBBER
NO CODE - SYNTHETIC RUBBER
DASH NUMBER
BASIC MS NUMBER
MS35489-14X INDICATES -
GROMMET, SILICONE RUBBER, HOT-OIL AND COOLANT RESISTANT;
GROOVE WIDTH .062; HOLE DIAMETER .500; GROOVE DIAMETER .812;
OUTSIDE DIAMETER 1.062; THICKNESS .312.
4. TOLERANCE:
TOLERANCES SHALL BE ± .031 INCH FOR THICKNESS (F) AND OUTSIDE DIAMETER (ØA); ± .016 INCH FOR ALL
OTHER DIMENSIONS.
NOTES:
1. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.
2. SUPERSESSION: REPLACEMENT PART NUMBER RELATIONSHIPS SHALL BE IN ACCORDANCE WITH TABLE II. CANCELLED
MS35490 GROMMETS MAY BE USED UNTIL EXISTING STOCKS ARE DEPLETED. DO NOT USE MS35490 GROMMETS TO
REPLACE MS35489 OR AN931 GROMMETS. AN931 GROMMETS AND SUPERSEDING MS35489 GROMMETS ARE UNIVERSALLY,
FUNCTIONALLY AND DIMENSIONALLY INTERCHANGEABLE.
3. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS STANDARD AND THE REFERENCES CITED HEREIN, THE TEXT
OF THIS STANDARD SHALL TAKE PRECEDENCE.
4. REFERENCED GOVERNMENT (OR NON GOVERNMENT) DOCUMENTS OF THE ISSUE LISTED IN THAT ISSUE OF THE
DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS (DODISS) SPECIFIED IN THE SOLICITATION FORM
A PART OF THIS STANDARD TO THE EXTENT SPECIFIED HEREIN.
5. GROMMETS PREVIOUSLY PROCURED WITH A SPLIT (SUFFIX “S”) ARE NO LONGER PROCURED OR STOCKED BY SERVICES.
FOR REPLACEMENT USE SOLID GROMMETS, AND SPLIT AT ASSEMBLY.
ADDITIONAL NOTES:
• PROCUREMENT SPECIFICATION: MIL-G-3036
• SUPERSEDES: MS35490 and AN931
• THIS INFORMATION FROM MILITARY STANDARD MS35489 PAGE 2 OF 3, REVISED FEBRUARY 17, 1989, SOME DETAILS
MAY HAVE BEEN OMITTED FOR CLARITY.
Continued...
196 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.


Part Number MS35489
Description Synthetic and Silicone Rubber
Maker ETC
PDF Download

MS35489 Datasheet PDF






Similar Datasheet

1 MS35489 Synthetic and Silicone Rubber
ETC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy