Datasheet4U Logo Datasheet4U.com

TL173L - LINEAR HALL-EFFECT SENSORS

Description

The TL173L and TL173C are low-cost magnetic field sensors designed to provide a linear output voltage proportional to the magnetic field they sense.

These monolothic circuits incorporate a Hall element as the primary sensor along with a voltage reference and a precision amplifier.

Features

  • high overall sensitivity accuracy with less then 5% error over its operating temperature range. The TL173L is characterized for operation from -20°C to 85°C. The TL173C is characterized for operation from 0°C to 70°C. Functional Block Diagram Absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, Vcc (see Note 1) Continuous total dissipation at (or below) 25°C free-air temperature (see Note 2) Operating free-air temperature range: TL173L.

📥 Download Datasheet

Datasheet Details

Part number TL173L
Manufacturer Unknown Manufacturer
File Size 440.65 KB
Description LINEAR HALL-EFFECT SENSORS
Datasheet download datasheet TL173L Datasheet

📁 Similar Datasheet

  • TL1741 - Operational Amplifier (Telefunken)
  • TL1003 - Thyristors (ST Microelectronics)
  • TL1006 - SCR (ST Microelectronics)
  • TL100V - Single Level 3.81 mm Pitch Vertical PCB Terminal Blocks (CONNECTWELL)
  • TL100V-2P - Single Level 3.81 mm Pitch Vertical PCB Terminal Blocks (CONNECTWELL)
  • TL100V-3P - Single Level 3.81 mm Pitch Vertical PCB Terminal Blocks (CONNECTWELL)
  • TL1013 - 25W LinearPA GaAs module (TRIAD)
  • TL1014 - Tact Switch (E-SWITCH)
  • TL103W - Dual Operational Amplifier (Texas Instruments)
  • TL103WA - Dual Operational Amplifier (Texas Instruments)
Other Datasheets by ETC

Full PDF Text Transcription

Click to expand full text
TI TL173 Linear Hall-Effect Sensor Data Sheet TL173L, TL173C LINEAR HALL-EFFECT SENSORS mirrored from http://www.gamearchive.com 7/18/05 7:44 AM Output Voltage Linear with Applied Magnetic Field Sensitivity Constant Over Wide Operating Temperature Range Solid-State Technology Three-Terminal Device Senses Static or Dynamic Magnetic Fields Description The TL173L and TL173C are low-cost magnetic field sensors designed to provide a linear output voltage proportional to the magnetic field they sense. These monolothic circuits incorporate a Hall element as the primary sensor along with a voltage reference and a precision amplifier.
Published: |