Datasheet4U Logo Datasheet4U.com

EMD2055 - PWM Step-Up DC/DC Converter

General Description

The EMD2055 is a highly efficient, step-up DC/DC converter for driving white LEDs.

The device can drive up to 10 serially connected white LEDs from a single Li-Ion battery, or to drive multiple serial and parallel combinations with a DC power supply from 2.5V to 5.5V.

Key Features

  • Up to 10 WLEDs supports.
  • Low Quiescent Current: 120 µA.
  • Over Voltage Protection: 36.5V.
  • Inherently Matched LED Current.
  • Shutdown Current < 1µA.
  • Reference Voltage 0.245V.
  • PWM Dimming Control (2kHz~200kHz).
  • Internal Soft Start and Compensation.
  • 1.4A Internal power MOSFET Switch.
  • Low Profile SOT-23-6 and TDFN-8L Packages Typical.

📥 Download Datasheet

More Datasheets from ESMT (Elite Semiconductor Microelectronics Technology)

Part Number Description
EMD2080 Constant Current LED Lighting Driver
EMD2095 PWM Step-Up DC/DC Converter

Full PDF Text Transcription for EMD2055 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for EMD2055. For precise diagrams, tables, and layout, please refer to the original PDF.

ESMT EMD2055 PWM Step-Up DC/DC Converter for Panel Backlight (10 WLEDs Driver) General Description The EMD2055 is a highly efficient, step-up DC/DC converter for driving ...

View more extracted text
he EMD2055 is a highly efficient, step-up DC/DC converter for driving white LEDs. The device can drive up to 10 serially connected white LEDs from a single Li-Ion battery, or to drive multiple serial and parallel combinations with a DC power supply from 2.5V to 5.5V. The EMD2055 uses current mode and pulse-width modulated (PWM) operation. Its high switching operation frequency of 1.2MHz allows the system to use small inductor, input and output capacitors. An internal compensation circuit can reduce the external component count. To safeguard the system, the EMD2055 includes various protection circuits such as under-voltage