• Part: AIF25R48N
  • Description: DC-DC / High Voltage Full Brick
  • Manufacturer: Emerson
  • Size: 105.93 KB
Download AIF25R48N Datasheet PDF
Emerson
AIF25R48N
AIF25R48N is DC-DC / High Voltage Full Brick manufactured by Emerson.
- Part of the AIF25R48N_aif25r48_rev02_2004_1191276878 comparator family.
700 Watts AIF25R48 Total Power: Input Voltages: No. of Outputs: 700 Watts (28V@25Amps) 48V Single Electrical Specs Input Input range Input Surge Efficiency 36 - 75 VDC 100V / 100ms 89%@28V Output Load Regulation Line Regulation Noise / Ripple Remote sense Output voltage adjust range Transient Response 0.5% typical down to min load 0.2% typical 200m V typical Up to 0.5V +10%/-20% 3% max for deviation with 25% to 50% full load 500 µS (max) recovery 5% typical 140% Vo (max) 140% Io (max) Special Features - 700W Continuous power at 100°C baseplate temperature - High efficiency - 89% @ 28V - Low output ripple and noise - Industry standard pin out - Positive and Negative enable function - Excellent transient response - OVP, LVP, OCP,OTP, S/C protection - Paralleable with accurate current sharing - Basic Insulation Current Share Accuracy Overvoltage Protection Current Limit Control Voltage Adjust Enable 80 to 110% Vo TTL patible (positive & negative enable options) Notes Nominal values apply with sense pins connected and other control pin unconnected. Environmental Operating temperature -20°C to +100°C (Case temperature) Storage temperature: -55°C to +125°C Overtemperature protection: 120°C max MTBF: TBD hours Specifications subject to change without notice. Safety UL CSA TUV CE EN60950 Licensed CE Mark 60950...