datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Emerson
Emerson

NTS355 Datasheet Preview

NTS355 Datasheet

AC-DC / 261W - 500W

No Preview Available !

NTS355 pdf
Embedded Power for
Business-Critical Continuity
NTS350 Series
350 Watts
Total Power:
Input Voltage:
# of Outputs:
200 - 350 Watts
85 - 264 VAC
120 - 300VDC
Single
Rev. 11.24.08
NTS350 Series
 of 3
Special Features
Active power factor correction
IEC EN6100-3-2 compliance
Remote sense
Power fail and remote inhibit
Single wire current sharing
Built-in EMI filter
Low output ripple
5V standby
12V fan output
Overvoltage protection
Overload protection
Thermal overload protection
DC power good
Built in OR-ing diode / FET
Optional fan cover (-CF suffix)
Safety
TUV
UL
CSA
NEMKO
AUSTEL
CB
CE
60950
0950
60950
60950
60950
Certificate and report
Mark (LVD)
Electrical Specifications
Input
Input ra­nge
85 - 264 VAC (wide range)
Frequency
47-440 Hz
Inrush current
38A max., cold start @ 25°C
Efficiency
EMI filter
Safety ground leakage
current
85% typical at full load
FCC Class B conducted and radiated; CISPR22 Class B conducted and radi-
ated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B con-
ducted and radiated.
<0.5mA @ 50/60 Hz, 264 VAC input
Output
Maximum power
Adjustment range
Standby output
Fan output
Hold-up time
200W for convection; 350W with 30CFM forced air
±5%
5V @ 2A regulated, ±5%
12 V @ 1A, -5 %, +7%, 0.5A for -CF version
20 ms @ 350 W load, 115 VAC nominal line at factory voltage setting
Overload protection
Short circuit protection on all outputs. Case overload protected @ 115-
130% above peak rating
Overvoltage protection 20-35% above nominal output



Emerson
Emerson

NTS355 Datasheet Preview

NTS355 Datasheet

AC-DC / 261W - 500W

No Preview Available !

NTS355 pdf
Embedded Power for
Business-Critical Continuity
Logic Control
Power failure
TTL logic signal goes high 100-500 msec after main output.
It goes low at least 4 msec before loss of regulation
Remote on/off
Requires an external contact closure to inhibit outputs
DC OK
TTL logic goes high after the output is in regulation. It goes low when there is
loss of regulation.
Remote sense
Compensates for 0.5 V lead drop min. Will operate without remote sense
connected. Reverse connection protected.
Environmental Specifications
Operating temperature:
0° to 50°C ambient derate each output as 2.5% per degree from 50° to
70°C.
Storage temperature:
Electromagnetic
susceptibility:
-40°C to +85°C
designed to meetEN61000-4;
-2, -3, -4, -5, -6, -8, -11 Level 3
Humidity:
Operating; non-condensing 10% to 90% RH
Vibration:
Three orthogonal axes, sweep at
1 oct/min, 5 min. dwell at four major resonances 2 G peak 8 Hz to 500
Hz, operational
MTBF demonstrated
1M hours at full load and 25°C ambient conditions
Ordering Information
Model
Number
Output
Voltage
Minimum
Load
Maximum Load Maximum Load
with Convection with 30CFM
Cooling
Forced Air
Peak Load1
Regulation2
Ripple
P/P (PARD)3
NTS353
12V 0A
16.6A
29.2A
33A ±2%
120mV
NTS355
24V 0A
8.3A
14.6A
16.5A ±2%
240mV
NTS358
48V 0A
4.2A
7.3A
8.2A ±2%
480mV
NTS359
54V 0A
3.7A
6.5A
7.4A ±2%
540mV
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2­. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and
load ranges.
Pin Assignments
Connector
SK1 PIN 1
PIN 3
PIN 5
Line
Neutral
Ground
SK5
1
6
PIN 1
5 PIN 2
PIN 3
10
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
PIN 10
V1 swp
- Remote Sense
+ Remote Sense
5VSB (standby)
5VSB return
+12V
Common
Inhibit
DC power good (DC OK)
Power Fail (POK)
Adjustment Potentiometers
P1 +V1 Output adjust
P3 +5VSB adjust
Mating Connectors
SK1 AC input Molex 09-50-8051 (USA)
Molex 09-91-0500 (UK)
PINS:08-52-0113
SK2,3,4
Molex BB-124-08
SK5 Control signals
Molex 90142-0010
PINS: 90119-2110 or
Amp: 87977-3
PINS: 87309-8
Notes:
1. Specifications subject to change without
notice.
2. All dimensions in inches (mm), tolerance is
±.02”.
3. Specifications are at factory settings
4. Mounting maximum insertion depth is 0.12”.
5. Warranty: 2 year
6. Weight: 2.5 lb. / 1.13 kg.
Astec Connector Kit #70-841-022 includes all of the above
Rev. 11.24.08
NTS350 Series
 of 3


Part Number NTS355
Description AC-DC / 261W - 500W
Maker Emerson
Total Page 3 Pages
PDF Download
NTS355 pdf
NTS355 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 NTS353 AC-DC / 261W - 500W Emerson
Emerson
NTS353 pdf
2 NTS353-CF AC-DC / 261W - 500W Emerson
Emerson
NTS353-CF pdf
3 NTS355 AC-DC / 261W - 500W Emerson
Emerson
NTS355 pdf
4 NTS355-CF AC-DC / 261W - 500W Emerson
Emerson
NTS355-CF pdf
5 NTS358 AC-DC / 261W - 500W Emerson
Emerson
NTS358 pdf
6 NTS358-CF AC-DC / 261W - 500W Emerson
Emerson
NTS358-CF pdf
7 NTS359 AC-DC / 261W - 500W Emerson
Emerson
NTS359 pdf
8 NTS359-CF AC-DC / 261W - 500W Emerson
Emerson
NTS359-CF pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy