900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Emerson

PTH05010Y Datasheet Preview

PTH05010Y Datasheet

DC-DC / Non-Isolated POLA memory

No Preview Available !

PTHxx010Y
3.3/5/12 Vin Single Output
DC-DC CONVERTERS Non-isolated DDR/QDR Memory Bus Termination Module
1
VTT bus termination output (output the system VREF)
15 A output current
3.3 Vdc, 5 Vdc or 12 Vdc input voltage
DDR and QDR compatible
ON/OFF inhibit (for VTT standby)
Under-voltage lockout
Operating temperature range: -40 ºC to +85 ºC
Efficiencies up to 91%
Output overcurrent protection (non-latching, auto-reset)
Point-of-Load-Alliance (POLA) compatible
Available RoHS compliant
NEW Product
The PTHxx010Y are a new series of non-isolated dc-dc converters designed specifically
for bus termination in DDR and QDR memory applications. Operating from either a
3.3 Vdc, 5 Vdc or 12 Vdc input, the modules generate a VTT output that will source or
sink up to 15 A of current to accurately track their VREF input. VTT is the required bus
termination supply voltage, and VREF is the reference voltage for the memory and chipset
bus receiver comparators. VREF is usually set to half the VDDQ power supply voltage.
The PTHxx010Y series employs an actively switched synchronous rectifier output to
provide state of the art stepdown switching conversion. The products are small in size
and are an ideal choice where space, performance and high efficiency are desired.
All specifications are typical at nominal input, VREF = 1.25 V, full load at 25 °C
Unless otherwise stated. Cin, Co1 and Co2 = typical value
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output current
(over ∆VREF range)
(See Note 1)
PTH03010Y and PTH05010Y
PTH12010Y
±15 A
±12 A
Tracking range for VREF
Tracking tolerance to VREF (VTT - VREF)
(over line, load
and temperature)
0.55-1.8 Vdc
-10 mV to +10 mV
Ripple and noise
20 MHz bandwidth
20 mV pk-pk
Load transient response
(See Note 4)
30 µs settling time
Overshoot/undershoot 30 mV typ.
Output capacitance:
Non-ceramic values
(See Notes 4 and 5)
Ceramic values
(See Notes 4)
(See Note 6)
PTH03010Y 470 µF typ., 8,200 µF max.
PTH05010Y 470 µF typ., 8,200 µF max.
PTH12010Y 940 µF typ., 6,600 µF max.
PTH03010Y
PTH05010Y
PTH12010Y
200 µF typ., 300 µF max.
200 µF typ., 300 µF max.
400 µF typ., 600 µF max.
ESR (non-ceramic)
4 mmin.
INPUT SPECIFICATIONS
Input current
No load
10 mA
Input voltage range
PTH03010Y
PTH05010Y
PTH12010Y
2.95-3.65 Vdc
4.5-5.5 Vdc
10.8-13.2 Vdc
Undervoltage lockout:
PTH03010Y
PTH05010Y
PTH12010Y
Vin increasing 2.45 V typ., 2.80 V max.
Vin decreasing 2.20 V min., 2.40 V typ.
Vin increasing 4.30 V typ., 4.45 V max.
Vin decreasing 3.40 V min., 3.70 V typ.
Vin increasing 9.5 V typ., 10.4 V max.
Vin decreasing 8.80 V min., 9.0 V typ.
INPUT SPECIFICATIONS CONTD.
Input capacitance
(See Note 3)
PTH03010Y and PTH05010Y 470 µF
PTH12010Y
560 µF
Remote ON/OFF
Positive logic
GENERAL SPECIFICATIONS
Efficiency
Io = 10 A
PTH03010Y
PTH05010Y
PTH12010Y
88% typ.
88% typ.
85% typ.
Insulation voltage
Non-isolated
Switching frequency
PTH03010Y
PTH05010Y
PTH12010Y
300-400 kHz
300-400 kHz
200-300 kHz
Approvals and
standards (pending)
EN60950
UL/cUL60950
Material flammability
UL94V-0
Dimensions
(L x W x H) 34.80 x 15.75 x 9.00 mm
1.370 x 0.620 x 0.354 in
Weight
3.7 g (0.13 oz)
MTBF
Telcordia SR-332
6,000,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 2)
Operating ambient, -40 ºC to +85 ºC
temperature
Non-operating
-40 ºC to +125 ºC
MSL (‘Z’ suffix only)
JEDEC J-STD-020C
Level 3
PROTECTION
Overcurrent threshold
(Auto reset)
PTH03010Y and PTH05010Y 27.5 A typ.
PTH12010Y
20.0 A typ.
File Name: PTHxx010Y.pdf Rev (02): 19 Dec 2005




Emerson

PTH05010Y Datasheet Preview

PTH05010Y Datasheet

DC-DC / Non-Isolated POLA memory

No Preview Available !

PTHxx010Y
3.3/5/12 Vin Single Output
DC-DC CONVERTERS Non-isolated DDR/QDR Memory Bus Termination Module
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
27 W
27 W
21.6 W
INPUT
VOLTAGE
2.95-3.65 Vdc
4.5-5.5 Vdc
10.8-13.2 Vdc
VTT
RANGE
0.55-1.8 Vdc
0.55-1.8 Vdc
0.55-1.8 Vdc
OUTPUT
CURRENT
(MIN.)
0A
0A
0A
OUTPUT
CURRENT
(MAX.)
±15 A
±15 A
±12 A
EFFICIENCY
(TYP.)
88%
88%
85%
MODEL
NUMBER (8,9)
PTH03010Y
PTH05010Y
PTH12010Y
Part Number System with Options
Product Family
Point of Load Alliance
Compatible
Input Voltage
03 = 3.3 V, 05 = 5 V
and 12 = 12 V
Output Current
01 = 15 A
Mechanical Package
Always 0
P T H 0 5 0 1 0 YA S T
Packaging Options
No Suffix = Trays
T = Tape and Reel (7)
Mounting Option (8)
D = Horizontal Through-Hole (Matte Sn)
H = Horizontal Through-Hole (Sn/Pb)
S = Surface-Mount (63/37 Sn/Pb
pin solder material)
Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu
pin solder material)
Pin Option
A = Through-Hole Std. Pin Length (0.140”)
A = Surface-Mount Tin/Lead Solder Ball
Output Voltage Code
Y = DDR Module
Notes
1 Rating is conditional on the module being soldered to a 4 layer PCB with
1 oz. copper. See the SOA curves or contact the factory for appropriate
derating.
2 This control pin has an internal pull-up to the input voltage Vin. If it is left
open-circuit the module will operate when input power is applied. A small
low-leakage (<100 nA) MOSFET is recommended for control. For further
information, consult Application Note 177.
3 An input capacitor is required for proper operation. The capacitor must
be rated for a minimum of 800 mA rms of ripple current.
4 The typical value of external output capacitance value ensures that VTT
meets the specified transient performance requirements for the memory
bus terminations. Lower values of capacitance may be possible when the
measured peak change in output current is consistently less than 3 A.
Test conditions were 15 A/µs load step, -1.5 A to +1.5 A.
5 This is the calculated maximum. The minimum ESR limitation will often
result in a lower value. Consult Application Note 177 for further details.
6 This is the typical ESR for all the electrolytic (non-ceramic) output
capacitance. Use 7 mas the minimum when using max-ESR values to
calculate.
7 Tape and reel packaging only available on the surface-mount versions.
8 To order Pb-free (RoHS compatible) surface-mount parts replace the
mounting option ‘S’ with ‘Z’, e.g. PTHXX010YAZ. To order Pb-free (RoHS
compatible) through-hole parts replace the mounting option ‘H’ with ‘D’,
e.g. PTHXX010YAD.
9 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No. US/8292/UL
File Name: PTHxx010Y.pdf Rev (02): 19 Dec 2005


Part Number PTH05010Y
Description DC-DC / Non-Isolated POLA memory
Maker Emerson
Total Page 4 Pages
PDF Download

PTH05010Y Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 PTH05010W PTH05010: 15 A 5-V Input Non-Isolated Wide-Output Adjust Power Modules (Rev. C)
ETCTI
2 PTH05010W DC-DC / Non-Isolated POLA
Emerson
3 PTH05010Y DC-DC / Non-Isolated POLA memory
Emerson





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy