Embedded Power for
Business-Critical Continuity
SIL10E Series
3.0 Vin - 5.5 Vin
Total Power: 49.9 Watts
Input Voltage: 3.0-5.5 Vdc
# of Outputs: Single
Rev.3.4.09_96
SIL10E_05 Series
of 4
Special Features
• 10 A Current rating
• Input voltage range:
3 Vdc to 5.5 Vdc
• Output voltage range:
0.8 Vdc to 3.63 Vdc
• Ultra high efficiency:
96% @ 5 Vin and 3.3 Vout
• Extremely low internal
power dissipation
• Minimal thermal
design concerns
• Designed in reliability:
MTBF of 7,000,000 hours per
Telcordia SR-332
• Ideal solution where board
space is at a premium or
tighter card pitch is required
• Industry standard
footprint and pin out
• Available RoHS compliant
• 2 year warranty
Safety
• UL/cUL CAN/CSA 22.2
No. 60950-1-03/UL 60950-1,
File No. E186249
• TÜV Product Service
(EN60950) Certificate No.
B 08 05 51485 378
• CB report and certificate to
IEC60950, Certificate No.
DE3-51686M1
Electrical Specifications
Input
Input voltage range:
Input current:
Input current (max.):
Input reflected ripple:
Remote ON/OFF:
Start-up time:
Output
Voltage adjustability:
(See Note 1)
Setpoint accuracy:
Line regulation:
Load regulation:
Minimum load:
Overshoot/Undershoot:
Ripple and noise:
Temperature co-efficient:
Transient response:
Remote sense:
No load
3.0-5.5 Vdc
70 mA
8 A max. @ lo max.
and Vout = 3.3 V
65 mA rms
(See Note 2)
20 ms
Fixed output versions
5 Vin with wide trim
3.3 Vin with wide trim
±10%
0.8 - 3.63 Vdc
0.8 - 2.75 Vdc
±0.4% typ.
±0.2% typ.
±1.0% typ.
0A
None
50 mV pk-pk
25 mV rms max.
±0.01%/˚C
50 mV max. deviation
50µs recovery to within ±1.0%
10% Vo compensation
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
