900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Emerson

SIL20C2-00SADJ-HJ Datasheet Preview

SIL20C2-00SADJ-HJ Datasheet

DC-DC / Non-Isolated

No Preview Available !

SIL/SMT20C2 Series
4.5 Vin to 13.8 V Single Output
DC-DC CONVERTERS C Class Non-isolated
20 A current rating
Input voltage range: 4.5-13.8 V
Output voltage: 0.59-5.1 V
Industry leading value
Cost optimized design
Excellent transient response
Output enable
Output voltage adjustability
Pathway for future upgrades
Supports silicon voltage migration
Resulting in reduced design-in and qual time
Current sink capability
RoHS compliant
The SIL/SMT20C2 series is a new high density, open frame, non-isolated
converter for space sensitive applications. This model has a wide input range
(4.5-13.8 Vdc) and offers a wide 0.59-5.1 V output voltage range with 20 A
load capability. An external resistor adjusts the output voltage from its pre-set
value of 0.59 V to any value up to the 5 V maximum. Typical efficiencies for
the models are 93% for the 12 V input version. The series offers remote ON/
OFF and over-current protection as standard.
All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated
August 27, 2008
1
NEW Product
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output voltage
(See Note 5)
Output setpoint
accuracy
0.1% trim resistors
Line regulation
Low line to high line
Load regulation
Full load to min. load
Min/max load
Overshoot
At turn-on
Undershoot
At turn-off
Ripple and noise
5 Hz to 20 MHz
(See Note 1)
Transient response (See Notes 1, 2)
INPUT SPECIFICATIONS
Input voltage range
Input current
Minimum load
Remote OFF
Input current (max.) (See Note 3)
Start-up time
Remote ON/OFF
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2
0.59-5.1 V
±1.0%
±0.2%
±0.5%
0 A/20 A
0.5% max.
100 mV max.
30 mV
Vin = 5 V, Vout = 2.5 V
130 mV max. deviation
50 μs recovery within
regulation band
4.5-13.8 Vdc
50 mA
5 mA
18 A @ Io max.
3 ms
GENERAL SPECIFICATIONS
Efficiency
Vin=5 V, Vo=2.5 V, lo=20 A
Switching frequency Fixed
Approvals and
standards (pending)
Material flammability
Weight
MTBF
12 V @ 40 °C
100% load
Bellcore 332
Coplanarity
90%
750 kHz
EN60950
UL/cUL6950
UL94V-0
8.50 g/0.3 oz.
6,721,853 hours
150 μm
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient,
(See Note 5)
temperature
Non-operating
PROTECTION
Short-circuit
Overvoltage protection
0 °C to +70 °C
-40 °C to +125 °C
Hiccup, non-latching
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
(See Note 6)
Output capacitance (See Note 7)
0 μF
0 μF
TÜV Product Service (EN60950)
CB report and certicate to IEC60950
File Name: sil/smt20c2.pdf Rev: 27 Aug 2008




Emerson

SIL20C2-00SADJ-HJ Datasheet Preview

SIL20C2-00SADJ-HJ Datasheet

DC-DC / Non-Isolated

No Preview Available !

SIL/SMT20C2 Series
4.5 Vin to 13.8 V Single Output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.powerconversion.com/products/
August 27, 2008
2
NEW Product
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
MOUNT OUTPUT
VOLTAGE
100 W 4.5-13.8 Vdc Horizontal 0.59-5.1 V
100 W 4.5-13.8 Vdc Vertical 0.59-5.1 V
100 W 4.5-13.8 Vdc Horizontal 0.59-5.1 V
Surface
OUTPUT
CURRENT
(MIN.)
0A
0A
0A
OUTPUT
CURRENT
(MAX.)
20 A
20 A
20 A
EFFICIENCY
(TYP.)
93%
93%
93%
REGULATION
LINE
LOAD
±0.2% ±0.5%
±0.2%
±0.2%
±0.5%
±0.5%
MODEL
NUMBER(8, 9)
SIL20C2-00SADJ-HJ
SIL20C2-00SADJ-VJ
SMT20C2-00SADJJ
Part Number System with Options
SXX20C2-00SADJ-VJ
Product Family
SMT = Surface Mount
SIL = Single In Line
Rated Output Current
06 = 6 A
15 = 15 A
20 = 20 A
30 = 30 A
40 = 40 A
Performance
C = Cost Optimized
Generation
Blank = Standard Part
2 = Increased Current Density
RoHS Compliance(8)
J = Pb-free (RoHS 6/6 compliant)
Mounting Option
-V = Vertical
-H = Horizontal
Blank = Horizontal Surface
Output Voltage
Single Adjustable Output
Input Voltage
00 = 4.5-13.8 V
Output Voltage Adjustment of the SIL/SMT20C2 Series
The ultra-wide output voltage trim range offers major advantages to users
who select the SIL/SMT20C2. It is no longer necessary to purchase a variety
of modules in order to cover different output voltages. The output voltage
can be trimmed in a range of 0.59-5.1 V. When the SIL/SMT20C2 converter
leaves the factory, the ouput has been adjusted to the default voltage of 0.59 V.
Notes
1 Measured as per recommended system capacitance.
2 di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to
full lo and full lo to 0.75.
3 External input fusing is recommended.
4 Additional part numbers may be available with different output
voltages.
5 Airflow dependent, 100 LFM minimum required.
6 No capacitor needed for ripple current capability.
7 No capacitor needed for stability.
8 TSE RoHS 5/6 (non Pb-free) compliant versions may be available
on special request, please contact your local sales representative
for details.
9 NOTICE: Some models may not support all options. Please
contact your local Emerson Network Power representative or use
the on-line model number search tool at
http://www.powerconversion.com to find a suitable alternative.
Power Good
Enable
Vin
GND
41
5
7
SIL20C2
63
Cin
28
Rtrim
(for trim
down)
Cout
Vout
+Rsense
R
L
O
A
D
-Rsense
Figure 1: Standard Application Drawing
File Name: sil/smt20c2.pdf Rev: 27 Aug 2008


Part Number SIL20C2-00SADJ-HJ
Description DC-DC / Non-Isolated
Maker Emerson
Total Page 4 Pages
PDF Download

SIL20C2-00SADJ-HJ Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SIL20C2-00SADJ-HJ DC-DC / Non-Isolated
Emerson





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy