12 Vin single output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
150 W 10.2-13.8 Vdc
±0.2% ±1.5% SIL30C-12SADJ-VJ
Part Number System with Options
SIL = Single in Line
Packaging Options (13)
J = Pb-free (RoHS 6/6 compliant)
Rated Output Current
30 = 30 Amps
C = Cost Optimised
V = Vertical Mount
H = Horizontal Mount
Number of Outputs
SADJ = Single Adjustable Output
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SIL30C-12SADJ Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL30C-12SADJ
converter leaves the factory the output has been adjusted to the default
voltage of 0.9 V
1 Uses external resistor from TRIM to output ground. See Application Note
132 for details.
2 Measured with external filter. See Application Note 132 for details.
3 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max to 0.75
lo max and 0.75 lo max to 0.5 lo max.
4 External input fusing is recommended.
5 Power up is the time from application of dc input to POWER GOOD high.
Remote ON/OFF asserted high to POWER GOOD high.
6 Signal line assumed <3 m.
7 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
8 See Application Note 132 for operation above 50 ºC.
9 See Application Note 132 for ripple current requirements.
10 The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL30C-12SADJ-HJ.
11 This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An
external resistor adjusts the output voltage.
12 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the
model number, e.g. SIL30C-12SADJ-HP4J.
13 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
14 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
Remote sense (GND) 22
Remote sense (O/P)
File Name: SIL30C.PDF Rev (04): 16 Dec 2005