900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Emerson

SIP20C-05S3V3Y Datasheet Preview

SIP20C-05S3V3Y Datasheet

DC-DC / Non-Isolated

No Preview Available !

SIP20C Series
Single output
DC-DC CONVERTERS 9-20 W Non-isolated DC-DC Regulators
1
Updated version of SIP20
Best-of-class wide output trim range
Industry standard footprint
High power density (60 W/in3)
High Efficiency 90%
Fixed frequency (500 kHz)
Remote ON/OFF
Undervoltage lockout (UVLO)
Remote sense option
Available RoHS compliant
The SIP20C series are non-isolated dc-dc converters packaged in a single-in-line footprint
(2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5 Vdc to
3.3 Vdc and lower voltages. The SIP20C offers a best-of-class wide output trim range which
allows maximum design flexibility and a pathway for future upgrades. Local voltage
conversion by the SIP20C from existing 5 V system voltages eliminates the need for redesign
of existing power architectures when voltage requirements change. The SIP20C is designed
for applications that include distributed power, workstations, computers and file servers.
Implementing state of the art surface mount technology and automated manufacturing
techniques, the SIP20C offers compact size and efficiencies of 90%. The SIP20C is an
updated version of the original SIP20 and is fully compatible with the original model.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
S3V3J
S2V5J
S1V5J
60% to 115%
60% to 110%
87% to 130%
Set point accuracy
(See Note 1)
±2.7%
Line regulation
Vin = 4.5-5.5 V
±0.3%
Load regulation
Io = 0-6 A
±0.3%
Minimum load
0A
Overshoot/undershoot
None
Ripple and noise
(See Note 8)
0 to 20 MHz BW
100 mV pk-pk,
30 mV rms max.
Temperature coefficient
±0.01%/°C
Transient response
(See Note 2)
±2.0% max. deviation
300 µs recovery
to within ±1.0%
Remote sense
(See Note 6) 0.5 Vdc compensation
INPUT SPECIFICATIONS
Input voltage range
Input current
No load
Input current
@ Io max. and
Vin = 0-5.5 V
Input reflected ripple
(See Note 3)
Remote ON/OFF
Start-up time
External capacitor
(See Note 4)
4.5 to 5.5 VDC
150 mA
5.3 A max.
200 mA
(See Note 5)
1.0 ms
100 µF
EMC CHARACTERISTICS (4)
Radiated emissions
Electrostatic discharge
EN55022/11, FCC part 15
EN61000-4-2, IEC801-2
Level A
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Non-isolated
Switching frequency
Fixed
500 kHz typ.
Approvals and
standards (See Note 7)
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Material flammability
UL94V-0
Dimensions
(LxWxH)
63.5 x 13.97 x 5.84 mm
2.5 x 0.55 x 0.23 inches
Pin length
0.135 ±0.02 inches (3.43 ±0.5 mm)
Weight
5 g (0.18 oz)
MTBF
MIL-HDBK-217F >1,000,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient,
convection cooled
Operating ambient,
300 LFM forced air
Non-operating
See curve
-25 °C to +85 °C
See Curve
-55 °C to +100 °C
Altitude
Operating
Non-operating
10,000 feet max.
40,000 feet max.
Vibration
5-500 Hz
2.4G rms (approx.)
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 126328
UL1950 File No. E174104
CSA 22.2 No. 950 and CB Report and Certificate to DE1-31667
File Name: sip20c.pdf Rev (01): 16 Dec 2005




Emerson

SIP20C-05S3V3Y Datasheet Preview

SIP20C-05S3V3Y Datasheet

DC-DC / Non-Isolated

No Preview Available !

SIP20C Series
Single output
DC-DC CONVERTERS 9-20 W Non-isolated DC-DC Regulators
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
OUTPUT
POWER
(MAX.)
20 W
15 W
9W
INPUT
VOLTAGE
4.5-5.5 Vdc
4.5-5.5 Vdc
4.5-5.5 Vdc
OUTPUT
VOLTAGE
3.3 V
2.5 V
1.5 V
OUTPUT
CURRENT
(MIN.)
0A
0A
0A
OUTPUT
CURRENT
(MAX.)
6A
6A
6A
EFFICIENCY
(TYP.)
90%
82%
75%
REGULATION
LINE
LOAD
±0.3%
±0.3%
±0.3%
±0.3%
±0.3%
±0.3%
MODEL
NUMBER (6, 10, 11)
SIP20C-05S3V3J
SIP20C-05S2V5J
SIP20C-05S1V5J
Notes
1 Vin = 5.0 V, Io = full load, TA = 25 °C. Total error band ±4.5% over all
operating conditions and temperatures until end of life.
2 di/dt = 1 A/1 µs, Vin = 5 Vdc, Tc = 25 °C, load change = 0.5 lo max. to lo
max. and Io max. to 0.5 Io max.
3 With simulated source impedance of 500 nH. 5 Hz to 20 MHz.
4 Use a 100 µF with ESR = 0.045 Ω max. at 100 kHz @ 25 °C.
5 Referenced to ground for shutdown. If pin 6 is high unit will shut down. If
pin 6 is open unit will operate as normal.
6 Single line sense; 0.5 Vdc compensation. Designate with the suffix 'R'
e.g. SIP20C-05S3V3RJ.
7 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
8 0 MHz to 20 MHz BW, 0.1 µF ceramic, 1 µF tantalum on output.
9 A short from +Vout to ground of less than 100 mΩ may cause the unit to
enter a non-destructive latch-up mode. If latch-up does occur the power
supply to the unit may need to be cycled.
10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
11 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
PROTECTION
Short-circuit
Input surge
Undervoltage
Thermal
Continuous (See Note 9)
6 Vdc continuous max.
UVLO Vin <3.8 V
Automatic recovery, unit will
shut down if RT1 exceeds 85 °C
(See diagram below)
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using either method shown below.
J1 PIN 5
J1 PIN 5
TRIM
UP
J2 PIN 5
J1 PIN 2
TRIM
DOWN
J2 PIN 5
J1 PIN 2
10K
TRIMPOT
DERATING CURVE
6
300 LFM
5 200 LFM
4 100 LFM
3 NATURAL
CONVECTION
2 COOLING
1
0
-25°C 0°C
15°C 25°C 35°C 45°C 55°C
AMBIENT TEMPERATURE (°C)
65°C
75°C
85°C
0.23 Max.
(5.84)
0.025
(0.635)
Square
Pins
PC Board
0.135
(3.43)
0.140 Max.
(3.556)
Optional Remote
Sense Pin (See Note 6)
0.28 (7.11)
2.50 (63.5)
1 2 34 5
J1
RT1
1234 56
J2
0.10 (2.54)
1.90 (48.26)
0.55 (13.97)
0.685 (17.40)
J1 PIN CONNECTIONS
PIN NUMBER
1
2
3
4
5
FUNCTION
+Vout
+Vout
Opt. Remote Sense (+)
+Vout
Ground
J2 PIN CONNECTIONS
PIN NUMBER
1
2
3
4
5
6
FUNCTION
Ground
+Vin
+Vin
No Pin
Trim
Remote ON/OFF
ALL DIMENSIONS IN INCHES (mm)
Recommended hole size 0.04 (1.0)
Plated through hole
Datasheet © Artesyn Technologies® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: sip20c.pdf Rev (01): 16 Dec


Part Number SIP20C-05S3V3Y
Description DC-DC / Non-Isolated
Maker Emerson
Total Page 2 Pages
PDF Download

SIP20C-05S3V3Y Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SIP20C-05S3V3J DC-DC / Non-Isolated
Emerson
2 SIP20C-05S3V3Y DC-DC / Non-Isolated
Emerson





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy