4.5-13.8 Vin Single Output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
March 15, 2006
(MAX.) VOL TAGE VOLTAGE
200 W 4.5-13.8 Vdc N/A 0.6-5 Vdc
NUMBER (8, 9)
±0.2% ±0.5% SIL40C2-00SADJ-VJ
Part Number System with Options
SIL = Single In Line
SMT = Surface Mount
Rated Output Current
06 = 6 A
15 = 15 A
20 = 20 A
30 = 30 A
40 = 40 A
C = Cost Optimized
Blank = Standard Part
2 = Increased Current Density
RoHS Compliance (8)
J = Pb-free (RoHS 6/6 compliant)
V = Vertical
H = Horizontal
Single Adjustable Output
00 = 4.5-13.8 V
Output Voltage Adjustment of the SIL40C2 Series
The ultra-wide output voltage trim range offers major advantages to users
who select the SIL40C2. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can
be trimmed in a range of 0.6-5 V. When the SIL40C2 converter leaves the
factory the ouput has been adjusted to the default voltage of 0.6 V.
1 Measured as per recommended system capacitance.
2 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to
full lo and full lo to 0.75.
3 External input fusing is recommended.
4 Additional part numbers may be available with different output
5 Airflow dependent, 100 LFM minimum required.
6 No capacitor needed for ripple current capability.
7 No capacitor needed for stability.
8 TSE RoHS 5/6 (non PB-free) compliant versions are also available
on special request, please contact your local sales representative
9 NOTICE: Some models may not support all options. Please
contact your local Artesyn representative or use the on-line model
number search tool at http://www.artesyn.com/powergroup/
products.htm to find a suitable alternative.
Figure 1: Standard Application Drawing
File Name: sil40c2.pdf Rev: 15 Mar 2006