Single Output External Power S u p p l y
EXTERNAL AC/DC POWER SUPPLIES 20 W External AC/DC Power Supplies
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
1 Peak output current lasting less than 3 seconds and non repetitive. During
peak loading output voltage may exceed total regulation limits.
2 20 MHz bandwidth, peak to peak, measured using 0.1 µF ceramic capacitor
in parallel with a 10 µF tantalum capacitor at the point of output load.
3 Total regulation is defined as the static output regulation at 25 °C, including
initial tolerance, line voltage within stated limits, load currents within stated
limits, and output voltages adjusted to their factory settings.
4 To help maintain the power supply safety approvals, the IEC320/C7 input
connector cable must be rated minimum 3.0 A and approved by an
applicable safety agency for the intended country of use. National and
international variations on mains plugs, adapters and customer preference
to lead length prevents Artesyn from supplying an IEC320/C7 (or
compatible) input connector cable. The IEC320/C7 input (or compatible)
connector cable can be sourced locally, e.g. Newark, Qual Electronics,
Radio Shack, etc. or other non affiliated distributors.
5 This feature protects output circuitry from output overvoltage caused by
internal PSU failure.
6 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
7 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
SINGLE OUTPUT PIN CONNECTIONS 2.5 MM JACK PLUG
Jack, P/N 712A or equiv.
IEC 320 two pins C8 type
Rated at 2.5 A, 250 Vac
4.646 ±0.02 [118.0 ±0.5]
2.5 mm Phone Jack
All Dimensions in inches [mm]
Datasheet © Artesyn Technologies® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
File Name: ssl20c.pdf Rev (03): 07 Nov 2005