900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Eutech Microelectronics

EUP2539 Datasheet Preview

EUP2539 Datasheet

10 White LED Boost Converter

No Preview Available !

EUP2539
10 White LED Boost Converter
In Thin TSOT-23 Package
DESCRIPTION
The EUP2539 is a constant current step-up converter
specifically designed to drive white LEDs. The Step-up
converter topology allows series connection of the
white LEDs, so the LED currents are identical for
uniform brightness. The EUP2539 switches at 1MHz,
allowing the use of tiny external components. The
output capacitor can be as small as 0.22µF, saving
space and cost versus alternative solutions. A low
0.3V feedback voltage minimizes power loss in the
current setting resistor for better efficiency. The
EUP2539 high-voltage output stage is perfect for
driving mid-size and large panel displays containing
up to ten white LEDs in series. LED dimming can be
done by using a DC voltage, a logic signal, or a pulse
width modulation(PWM) signal. The enable input pin
allows the device to be placed in shutdown mode with
“zero” quiescent current.
The EUP2539 is available in low profile TSOT23-5
package.
FEATURES
2.6V to 5.5V Input Range
38V Output Over Voltage Protection
Internal Soft-Start
PWM Dimming Control
Internal High Power 40V MOSFET Switch
Fast 1MHz Switching Frequency
Small, Low-Profile Inductors and Capacitors
TSOT23-5 Package
RoHS Compliant and 100% Lead (Pb)-Free
APPLICATIONS
GPS Navigation Systems
Portable Media Players
Handheld Devices, Digital Camera
Portable Game Machines
Typical Application Circuit
DS2539 Ver1.3 Dec. 2011
Figure 1. White LED Application
1




Eutech Microelectronics

EUP2539 Datasheet Preview

EUP2539 Datasheet

10 White LED Boost Converter

No Preview Available !

Pin Configurations
Package Type
EUP2539Tel: 0755-8398 3377 / 135 9011 2223 http://www.gofotech.com
Pin Configurations
TSOT23-5
Pin Description
PIN
SW
GND
FB
EN
IN
TSOT23-5
1
2
3
4
5
DESCRIPTION
Switch Pin.This is the drain of the internal power switch. Connect inductor/diode here.
Minimize trace area at this pin to reduce EMI.
Common Ground. Connect the pin to the ground plane.
Feedback Pin. Reference voltage is 0.3V. Connect cathode of lowest LED and resistor
here. Calculate resistor value according to the formula: RFB=0.3/ILED
Chip Enable Pin. Connect it to 1.4V or higher voltage to enable device, 0.3V or less
voltage to disable device.
Input Supply Voltage
DS2539 Ver1.3 Dec. 2011
2


Part Number EUP2539
Description 10 White LED Boost Converter
Maker Eutech Microelectronics
PDF Download

EUP2539 Datasheet PDF






Similar Datasheet

1 EUP2530 10 White LED Boost Converter
Eutech Microelectronics
2 EUP2537 10 White LED Boost Converter
Eutech Microelectronics
3 EUP2539 10 White LED Boost Converter
Eutech Microelectronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy