EUP3010A - 1A Synchronous Step-Down Converter

This page provides the datasheet information for the EUP3010A, a member of the EUP3010 1A Synchronous Step-Down Converter family.

Description

The EUP3010/A is a constant frequency, current mode, PWM step-down converter.

The device integrates a main switch and a synchronous rectifier for high efficiency.

Features

z z z z z z z z z z z z z z z z High Efficiency up to 96% 1.5MHz Constant Switching Frequency 1A Available Load Current 270µA Typical Quiescent Current 2.5V to 5.5V Input Voltage Range Adjustable Output Voltage as Low as 0.6V 100% Duty Cycle Low Dropout Operation No Schottky Diode Required Short Circuit and Thermal Protection Excellent Line and Load Transient Response ¡Õ 1µA Shutdown Current Soft Start Function Over Voltage Protection Available in 1.2V,1.8V,3.3V Fixed Output or Adjustable Output.

Eutech Microelectronics

📥 Download Datasheet

Datasheet Details

Part number	EUP3010A
Manufacturer	Eutech Microelectronics
File Size	773.54 KB
Description	1A Synchronous Step-Down Converter
Datasheet	EUP3010A Datasheet
Additional preview pages of the EUP3010A datasheet.

📁 Similar Datasheet

EUP3427 - Synchronous Step-Down Converter (Eutech)
EUP3618 - Charge Pump Flash LED Driver (Eutech)
EUP7998 - Sink/Source DDR Termination Regulator (Eutech)
EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)

Other Datasheets by Eutech Microelectronics

EUP3010 - 1A Synchronous Step-Down Converter
EUP3020 - Dual High-Efficiency 1.5MHz 1A PWM Step-Down DC-DC Converter
EUP3265 - 3MHz Synchronous Step-Down DC-DC Converter
EUP3270 - CC/CV Mode Synchronous Step-Down Converter
EUP3271 - CC/CV Mode Synchronous Step-Down Converter
EUP3271A - CC/CV Mode Synchronous Step-Down Converter
EUP3282H - 340KHz Synchronous Step-Down Converter
EUP3284H - 340KHz Synchronous Step-Down Converter

Full PDF Text Transcription

Click to expand full text

EUP3010/A 1.5MHz,1A Synchronous Step-Down Converter with Soft Start DESCRIPTION The EUP3010/A is a constant frequency, current mode, PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency. The 2.5V to 5.5V input voltage range makes the EUP3010/A ideal for powering portable equipment that runs from a single cell Lithium-Ion (Li+) battery or 3-cell NiMH/ NiCd batteries. The output voltage can be regulated as low as 0.6V. The EUP3010/A supports up to 1A load current and can also run at 100% duty cycle for low dropout applications, extending battery life in portable systems. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors.

Published: Jul 17, 2014 |