Datasheet4U Logo Datasheet4U.com

EUP3020 - Dual High-Efficiency 1.5MHz 1A PWM Step-Down DC-DC Converter

Description

The EUP3020 contains two independent 1.5MHz constant frequency, current mode, PWM step-down converters.

Each converter integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode.

Features

  • z z z z z z z z z z z z z Up to 96% Efficiency 1.5MHz Constant Switching Frequency 1A Load Current on Each Channel 2.5V to 5.5V Input Voltage Range Output Voltage as Low as 0.6V 100% Duty Cycle in Dropout Current Mode Operation Short Circuit Protection Thermal Fault Protection.

📥 Download Datasheet

Datasheet preview – EUP3020

Datasheet Details

Part number EUP3020
Manufacturer Eutech Microelectronics
File Size 759.53 KB
Description Dual High-Efficiency 1.5MHz 1A PWM Step-Down DC-DC Converter
Datasheet download datasheet EUP3020 Datasheet
Additional preview pages of the EUP3020 datasheet.

📁 Similar Datasheet

  • EUP3427 - Synchronous Step-Down Converter (Eutech)
  • EUP3618 - Charge Pump Flash LED Driver (Eutech)
  • EUP7998 - Sink/Source DDR Termination Regulator (Eutech)
  • EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)
Other Datasheets by Eutech Microelectronics
  • EUP3010 - 1A Synchronous Step-Down Converter
  • EUP3010A - 1A Synchronous Step-Down Converter
  • EUP3265 - 3MHz Synchronous Step-Down DC-DC Converter
  • EUP3270 - CC/CV Mode Synchronous Step-Down Converter
  • EUP3271 - CC/CV Mode Synchronous Step-Down Converter
  • EUP3271A - CC/CV Mode Synchronous Step-Down Converter
  • EUP3282H - 340KHz Synchronous Step-Down Converter
  • EUP3284H - 340KHz Synchronous Step-Down Converter

Full PDF Text Transcription

Click to expand full text
EUP3020 Dual High-Efficiency 1.5MHz 1A PWM Step-Down DC-DC Converter DESCRIPTION The EUP3020 contains two independent 1.5MHz constant frequency, current mode, PWM step-down converters. Each converter integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode. The EUP3020 is ideal for powering portable equipment that runs from a single cell Lithium-Ion (Li+) battery. Each converter can supply 1A of load current from a 2.5V to 5.5V input voltage. The output voltage can be regulated as low as 0.6V. The EUP3020 can also run at 100% duty cycle for low dropout applications. EUP3020 is available in an adjustable output or fixed output 1.2V, 1.8V and 3.3V. FEATURES z z z z z z z z z z z z z Up to 96% Efficiency 1.
Published: |