Datasheet4U Logo Datasheet4U.com

EUP3453 - 200KHz Step-Down Converter

General Description

The EUP3453 is current mode, step-down switching regulator capable of driving 3A continuous load with excellent line and load regulation.

The EUP3453 operates with an input voltage range from 4.75V to 40V and the output voltage is externally set from 0.92V to 15V with a resistor divider.

Key Features

  • 4.75V to 40V Wide Input Operating Range Output Adjustable from 0.92V to 15V Up to 3A Output Current Programmable Output Current Threshold Programmable Output Over Voltage Threshold 3µA Low Shutdown Current 0.1Ω Internal DMOS Output Switch Up to 95% Efficiency Fixed 200kHz Switching Frequency Internal Soft Start Secondary Cycle-by-Cycle Current Limit Thermal Shutdown Input Supply Undervoltage Lockout Available SOP-8 (EP) Package RoHS Compliant and 100% Lead(Pb)-Free Halogen-Free.

📥 Download Datasheet

Datasheet Details

Part number EUP3453
Manufacturer Eutech Microelectronics
File Size 841.10 KB
Description 200KHz Step-Down Converter
Datasheet download datasheet EUP3453 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3451 500KHz Step-Down Converter
EUP3452A 300KHz Step-Down Converter
EUP3455 200KHz Step-Down Converter
EUP3458 1.2MHz Step-Down Converter
EUP3401 Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3453 3A,40V,200KHz Step-Down Converter DESCRIPTION The EUP3453 is current mode, step-down switching regulator capable of driving 3A continuous load with excellent line and load regulation. The EUP3453 operates with an input voltage range from 4.75V to 40V and the output voltage is externally set from 0.92V to 15V with a resistor divider. The output current threshold is programmed by an external resistor. The EUP3453 enters into the CC (constant current) mode when output reaches over current threshold. The OV (over voltage) threshold is programmed by an external resistor divider. The EUP3453 stops switching when output reaches over voltage threshold. Fault condition protection includes secondary cycle-by-cycle current limit and thermal shutdown.