Datasheet4U Logo Datasheet4U.com

EUP3475A - 1MHz Synchronous Step-Down Converter

General Description

The EUP3475A is a 1MHz fixed frequency synchronous current mode buck regulator.

Key Features

  • short circuit and thermal protection circuits to increase system reliability. Externally programmable soft-start allows for proper power on sequencing with respect to other power supllies and avoids input inrush current during startup. In shutdown mode, the supply current drops below 1µA. The EUP3475A is available in SOP-8 package with the exposed pad.

📥 Download Datasheet

Datasheet Details

Part number EUP3475A
Manufacturer Eutech Microelectronics
File Size 709.57 KB
Description 1MHz Synchronous Step-Down Converter
Datasheet download datasheet EUP3475A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3475 1MHz Synchronous Step-Down Converter
EUP3472 500kHz Synchronous Step-Down Converter
EUP3476 500kHz Synchronous Step-Down Converter
EUP3476A 500kHz Synchronous Step-Down Converter
EUP3401 Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3475A 3A, 28V, 1MHz Synchronous Step-Down Converter DESCRIPTION The EUP3475A is a 1MHz fixed frequency synchronous current mode buck regulator. The device integrates both 135mΩ high-side switch and 90mΩ low-side switch that provide 3A of continuous load current over a wide operating input voltage of 4.5V to 28V.The internal synchronous power switch increases efficiency and eliminates the need for an external Schottky diode. Current mode control provides fast transient response and cycle-by-cycle current limit. At heavy load, the EUP3475A operates at a fixed frequency Pulse-Width Modulation mode for excellent stability and transient response. At light load, the EUP3475A will operates at a PulseSkipping mode to save power.