900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Eutech Microelectronics

EUP8095 Datasheet Preview

EUP8095 Datasheet

1.5A Linear Li-Ion/Polymer Charger IC

No Preview Available !

EUP8095
1.5A Linear Li-Ion/Polymer Charger IC
with Integrated FET and Charger Timer
DESCRIPTION
The EUP8095 series are highly integrated single cell
Li-Ion/Polymer battery charger IC designed for handheld
devices. This charger is designed to work with various
types of AC adapters or a USB port and capable of
operating with an input voltage as low as 2.65V.
The EUP8095 operates as a linear charger and charges the
battery in three phases: trickle current, constant current,
and constant voltage. When AC-adapter is applied, an
external resistor sets the magnitude of the charge current,
which may be programmed up to 1.5A with TDFN10
package and a current-limited adapter for lowest power
dissipation.
The EUP8095 features thermal regulation loop to control
charge current to keep safe operation when PCB lacked of
enough heat-sinking. A programmable charge timer
provides a backup safety for termination. The EUP8095
automatically re-starts the charge if the battery voltage
falls below an internal threshold and automatically enters
sleep mode when DC supplies are removed. No external
sense resistor or blocking diode is required for charging. A
NTC thermistor interface is used for charging the battery
in a safe temperature range.
FEATURES
z Very Low Power Dissipation
z Accepts Multiple Types of Adapters or USB BUS
Power
z Integrated Power FET and Current Sensor for Up
to 1.5A Charge Applications
z Guaranteed to Operate at 2.65V After Start-Up
z Charge Termination by Minimum Current and
Time
z Precharge Conditioning With Safety Timer
z Reverse Leakage Protection Prevents Battery
Drainage
z Charge Current Thermal Regulation
z Status Outputs for LED or System Interface
Indicates Charge and Fault Conditions
z Optional Battery Temperature Monitoring Before
and During Charge
z Automatic Sleep Mode for Low-Power
Consumption
z Available in 3mm × 3mm TDFN-10 Package
z RoHS Compliant and 100% Lead (Pb)-Free
Typical Application Circuit
APPLICATIONS
z PDAs, Cell Phones and Smart Phones
z Portable Instruments.
z Stand-Alone Charger.
z USB Bus Powered Charger.
DS8095 Ver 0.1 July 2008
Figure 1.
1




Eutech Microelectronics

EUP8095 Datasheet Preview

EUP8095 Datasheet

1.5A Linear Li-Ion/Polymer Charger IC

No Preview Available !

Block Diagram
EUP8095Tel: 0755-8398 3377 / 135 9011 2223 http://www.gofotech.com
Figure 2.
DS8095 Ver 0.1 July 2008
2


Part Number EUP8095
Description 1.5A Linear Li-Ion/Polymer Charger IC
Maker Eutech Microelectronics
PDF Download

EUP8095 Datasheet PDF






Similar Datasheet

1 EUP8090 1A Linear Li-Ion/Polymer Charger IC
Eutech
2 EUP8092 1.5A Linear Li-Ion/Polymer Charger IC
Eutech Microelectronics
3 EUP8095 1.5A Linear Li-Ion/Polymer Charger IC
Eutech Microelectronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy