EUP8209-8.4A - Switch Mode Li-Ion/Polymer Battery Charger

This page provides the datasheet information for the EUP8209-8.4A, a member of the EUP8209-4.2 Switch Mode Li-Ion/Polymer Battery Charger family.

Description

The EUP8209 is a constant current, constant voltage Li-Ion battery charger controller that uses a current mode PWM step-down (buck) switching architecture.

Features

Wide Input Supply Voltage Range: 4.8V to 20V.
4.2 Version 8.9V to 20V.
8.4 Version 8.9V to 20V.
8.4A Version 500kHz Switching Frequency End-of-Charge Current Detection Output 12 Hour Charge Termination Timer ±1% Charge Voltage Accuracy ±10% Charge Current Accuracy Low 10µA Reverse Battery Drain Current Automatic Battery Recharge Automatic Trickle Charging of Low Voltage Batteries Automatic Sleep Mode for Low Power Consumption Battery Temperature Sensing Stable with Cer.

Eutech Microelectronics

📥 Download Datasheet

Datasheet Details

Part number	EUP8209-8.4A
Manufacturer	Eutech Microelectronics
File Size	120.28 KB
Description	Switch Mode Li-Ion/Polymer Battery Charger
Datasheet	EUP8209-8.4A Datasheet
Additional preview pages of the EUP8209-8.4A datasheet.

📁 Similar Datasheet

EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)
EUP3427 - Synchronous Step-Down Converter (Eutech)
EUP3618 - Charge Pump Flash LED Driver (Eutech)
EUP7998 - Sink/Source DDR Termination Regulator (Eutech)

Other Datasheets by Eutech Microelectronics

EUP8209-8.4 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8209-4.2 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8202-4.2 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8202-8.4 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8202-8.4A - Switch Mode Li-Ion/Polymer Battery Charger
EUP8207-4.2 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8207-8.4 - Switch Mode Li-Ion/Polymer Battery Charger
EUP8207-8.4A - Switch Mode Li-Ion/Polymer Battery Charger

Full PDF Text Transcription

Click to expand full text

EUP8209-4.2/8.4/8.4A Switch Mode Li-Ion/Polymer Battery Charger DESCRIPTION The EUP8209 is a constant current, constant voltage Li-Ion battery charger controller that uses a current mode PWM step-down (buck) switching architecture. With a 500kHz switching frequency, the EUP8209 provides a small, simple and efficient solution to fast charge one (4.2V) or two (8.4V) cell lithium-ion batteries. The EUP8209 charges the battery in three phases: conditioning, constant current, and constant voltage. An external sense resistor sets the charge current with ±10% accuracy. An internal resistor divider and precision reference set the final float voltage to 4.2V per cell with ± 1% accuracy.

Published: Jul 25, 2014 |