Datasheet4U Logo Datasheet4U.com

6N137 - 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER

Description

The 6N137, EL2601 and EL2611 are consists of an infrared emitting diode optically coupled to a high speed integrated photo detector logic gate with a strobable output.

It is packaged in a 8-pin DIP package and available in wide-lead spacing and SMD options.

Ground loop elimin

Features

  • High speed 10Mbit/s.
  • 10kV/µs min. common mode transient immunity (EL2611).
  • Guaranteed performance from -40 to 85.
  • Logic gate output.
  • High isolation voltage between input and output (Viso=5000 V rms ).
  • Pb free and RoHS compliant.
  • UL approved (No. 214129).
  • VDE approved (No. 132249).
  • SEMKO approved.
  • NEMKO approved.
  • DEMKO approved.
  • FIMKO approved.
  • CSA approved (No. 2037145) 3 6 ℃.

📥 Download Datasheet

Datasheet Details

Part number 6N137
Manufacturer Everlight
File Size 1.16 MB
Description 8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER
Datasheet download datasheet 6N137 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
6N137 IRED Photocoupler Toshiba Semiconductor
6N137 Super High Speed Response OPIC Photocoupler Sharp Electrionic Components
6N137 HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS Fairchild Semiconductor
6N137 Optocoupler ISOCOM
6N137 Logic Gate Optocoupler ON Semiconductor

Other Datasheets by Everlight

Part Number Description
6N135 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER
6N136 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER

Full PDF Text Transcription

Click to expand full text
8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE PHOTOCOUPLER 6N137 EL26XX series Schematic 1 8 2 7 Features • High speed 10Mbit/s • 10kV/µs min. common mode transient immunity (EL2611) • Guaranteed performance from -40 to 85 • Logic gate output • High isolation voltage between input and output (Viso=5000 V rms ) • Pb free and RoHS compliant. • UL approved (No. 214129) • VDE approved (No. 132249) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved • CSA approved (No. 2037145) 3 6 ℃ 4 5 A 0.1µF bypass capacitor must be *3 connected between pins 8 and 5 Pin Configuration 1, No Connection 2, Anode 3, Cathode 4.
Published: |