SP26LV432 - HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER

Exar

The SP26LV432 by Exar is a HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER. Below is the official datasheet preview.

Datasheet Details

Part number	SP26LV432
Manufacturer	Exar
File Size	537.55 KB
Description	HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER
Datasheet	SP26LV432-Exar.pdf
Additional preview pages of the SP26LV432 datasheet.

The SP26LV432 is a quad differential line receiver with three-state outputs designed to meet the EIA specifications of the RS-422 serial protocol.

Exar's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol at 50Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV432 features a receiver enable control common to all four receivers and a high-Z output with 6mA source and sink capability. Since the cabling can be as long as 4,000 feet, the RS-422 receivers of the SP26LV432 are e.

📁 SP26LV432 Similar Datasheet

SP26LV431 - High Speed / +3.3V Quad RS-422 Differential Line Driver (Sipex)
SP2638C - Constant current and constant voltage primary control power switch (SPMICRO)
SP2638D - constant current and constant voltage primary-side controlled power switch (SPMICRO)
SP2638F - Primary side control constant current / constant voltage AC / DC control circuit (Shenchuanghui Electronics)
SP2658E - Constant current and constant voltage primary control power switch (SPMICRO)
SP200 - +5V High-Speed RS-232 Transceivers with 0.1mF Capacitors (Sipex)
SP200F - (SP200F / SP250F) Rectifier Stacks (VMI)
SP200S - (SP200S / SP250S) Rectifier Stacks (VMI)

Other Datasheets by Exar

Published: Mar 24, 2017 |