Datasheet4U Logo Datasheet4U.com

SP6686 - 400mA Buck/Boost Charge Pump LED Driver

Description

The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications.

The charge pump can be set to regulate two current levels for FLASH and TORCH modes.

Features

  • Output Current up to 400mA.
  • Up to 94% Efficiency in Torch Mode.

📥 Download Datasheet

📁 Similar Datasheet

  • SP6686 - Buck/Boost Charge Pump LED Driver (Sipex Corporation)
  • SP6686 - 400mA Buck/Boost Charge Pump LED Driver (MaxLinear)
  • SP6680 - High Efficiency Buck/Boost Charge Pump Regulator (Sipex)
  • SP6681 - High Efficiency Boost Charge Pump Regulator (Sipex)
  • SP6682 - High Efficiency Charge Pump Regulator for White LEDs (Sipex)
  • SP6683 - 1X/1.5X High Efficiency Charge Pump LED Driver (Sipex)
  • SP6685 - 700mA Buck/Boost Charge Pump LED Driver (Sipex)
  • SP6687 - 4 Channel Charge Pump (Sipex Corporation)
  • SP6641A - 500mA Alkaline DC/DC Boost Regulator (Sipex)
  • SP6641B - 500mA Alkaline DC/DC Boost Regulator (Sipex)
Other Datasheets by Exar
  • SP6682 - High Efficiency White LED Charge Pump Regulator
  • SP6685 - 700mA Buck/Boost Charge Pump LED Driver
  • SP6650 - High Efficiency 600mA Synchronous Buck Regulator
  • SP6655 - High Efficiency 400mA Synchronous Buck Regulator
  • SP6669 - 600mA 1.5MHz Synchronous Step Down Converter
  • SP6691 - Micro Power Boost Regulator Series White LED Driver
  • SP6699 - 30V Step Up White LED Driver
  • SP6134 - 600kHz Synchronous PWM Step Down Controller

Full PDF Text Transcription

Click to expand full text
August 2009 SP6686 400mA Buck/Boost Charge Pump LED Driver Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH and TORCH modes. The SP6686 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. A low current sense reference voltage (50mV) allows the use of small 0603 current sensing resistors. The SP6686 is designed to operate from a single cell lithium-ion battery or fixed 3.3V or 5.
Published: |