Datasheet4U Logo Datasheet4U.com

XRP2524 - 1A Dual Channel USB 3.0 Power Distribution Switch

Description

The XRP2524 is a dual channel integrated high-side power distribution switch optimized for self or bus-powered USB applications and it is compliant with the latest USB 3.0 specification.

Features

  • Dual Channel Current Switch  1A continuous load current per channel  1.5A Typical Over-current Limit  2.7V to 6.5V Input Voltage Range.
  • USB 2.0 and USB 3.0 Compliant.
  • Active High Enable.
  • Soft Start.
  • Channel Error Flag Indicator  9ms Blanking Time.
  • UVLO, Reverse Current, Short circuit and Thermal Shutdown Protection.
  • RoHS Compliant, Green/Halogen Free 8-Pin NSOIC Package.

📥 Download Datasheet

📁 Similar Datasheet

  • XRP2997 - 2A DDRI/II/III/IV Bus Termination Regulator (MaxLinear)
  • XRP6272 - 2A 5V-Adjustable Low Dropout Voltage Regulator (MaxLinear)
  • XRP6657 - 1.5A 1.3MHz Synchronous Step Down Converter (Exar Corporation)
  • XRP6658 - 1A 1.5MHz PFM/PWM Synchronous Step-Down Converter (MaxLinear)
  • XRP6658 - 1A 1.5MHz PFM/PWM Synchronous Step-Down Converter (Exar Corporation)
  • XRP6668 - 1A/1A Dual Channel 1.5MHz Sync. Step Down Converter (Exar Corporation)
  • XRP6670 - 3A 300kHz - 2.5MHz Synchronous Step-Down Regulator (MaxLinear)
  • XRP6840 - 4.3A Supercapacitor Flash LED Driver (Exar Corporation)
  • XRP7603 - 0.5A 29V Non-Synchronous Buck High Power LED Driver (Exar Corporation)
  • XRP7604 - 1A 29V Non-Synchronous Buck High Power LED Driver (Exar Corporation)
Other Datasheets by Exar
  • XRP2523 - 1.5A Single Channel USB 3.0 Power Distribution Switch
  • XRP2525 - Single/Dual Channel USB 3.0 Power Distribution Switch
  • XRP2526 - Single/Dual Channel USB 3.0 Power Distribution Switch
  • XRP2527 - Single/Dual Channel Adjustable Current Power Distribution Switch
  • XRP2528 - Single/Dual Channel Adjustable Current Power Distribution Switch
  • XRP29302 - 3A Low Dropout Voltage Regulator
  • XRP2997 - 2A DDR I/II/III Bus Termination Regulator
  • XRP1117 - 800mA Low Dropout Positive Voltage Regulator

Full PDF Text Transcription

Click to expand full text
XRP2524 1A Dual Channel USB 3.0 Power Distribution Switch October 2012 GENERAL DESCRIPTION The XRP2524 is a dual channel integrated high-side power distribution switch optimized for self or bus-powered USB applications and it is compliant with the latest USB 3.0 specification. It accepts an input voltage between 2.7V and 6.5V allowing for operations from industry standard 3.3V and 5V power rails. The XRP2524 is provided with an enable pin while an error flag is available to indicate fault conditions. With a low quiescent current as well as a small package, the XRP2524 is ideal for battery powered applications. The powerswitch rise and fall times are controlled to minimize current surges during turn on/off.
Published: |