Datasheet4U Logo Datasheet4U.com

SP3496E - (SP3495E - SP3497E) 3.3V High Speed RS-485/RS-422 Transceivers

Download the SP3496E datasheet PDF. This datasheet also covers the SP3495E variant, as both devices belong to the same (sp3495e - sp3497e) 3.3v high speed rs-485/rs-422 transceivers family and are provided as variant models within a single manufacturer datasheet.

Description

The SP3495E - SP3497E transceivers are suitable for high speed bidirectional communication on multipoint bus transmission lines.

They are designed for balanced data transmission and comply with both RS-485 and RS-422 EIA standards.

Features

  • 3.3V Single Supply Operation.
  • High Speed up to 32Mbps.
  • Robust +/-15kV ESD protection.
  • Hot Swap glitch protection.
  • Advanced Fail-safe Receiver Inputs.
  • Half Unit Load, 64 Transceivers on bus.
  • Driver short circuit current limit and thermal shutdown for overload protection.
  • Low Current 1uA shutdown mode.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SP3495E_ExarCorporation.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SP3490 3.3V Low Power Full-Duplex RS-485 Transceivers MaxLinear
SP3490 +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate Sipex
SP3490 +3.3V Low Power Full-Duplex RS-485 Transceivers Exar
SP3491 3.3V Low Power Full-Duplex RS-485 Transceivers MaxLinear
SP3491 +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate Sipex

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP3495E (SP3495E - SP3497E) 3.3V High Speed RS-485/RS-422 Transceivers
SP3497E (SP3495E - SP3497E) 3.3V High Speed RS-485/RS-422 Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP3495E-3497E HIGH SPEED +3.3V RS-485/RS-422 TRANSCEIVERS WITH +/-15KV ESD PROTECTION AND ADVANCED FAILSAFE www.DataSheet4U.com MAY 2009 REV. 1.0.0 GENERAL DESCRIPTION The SP3495E - SP3497E transceivers are suitable for high speed bidirectional communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with both RS-485 and RS-422 EIA standards. Each device contains one differential driver and one differential receiver Driver differential outputs and receiver differential inputs are connected internally to form a half-duplex input/output to the RS-485 bus. Separate RE and DE pins enable and disable the driver and receiver independently or may be externally connected together as a direct control.
Published: |