ST78C36 Datasheet ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO

Manufacturer: Exar (now MaxLinear)

Overview: www.DataSheet4U.com áç FEBRUARY 2004 ST78C36/36A ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO REV. 5.0.

📥 Download Datasheet

ST78C36 ecp/epp parallel printer port with 16-byte fifo by Exar (now MaxLinear) - Datasheet Preview

Datasheet Details

Part number	ST78C36
Manufacturer	Exar (now MaxLinear)
File Size	418.62 KB
Description	ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO
Download	ST78C36 Download (PDF)

General Description

The ST78C36/36A is a monolithic Parallel Port Interface for use with IBM PC compatible platforms.

Operation as a standard Centronics printer port is the default, but software may re-configure the device to support bi-directional IBM PS/2 parallel port, Enhanced Parallel Port (EPP), or the Extended Capabilities Port (ECP , as defined by Hewlett Packard and Microsoft) modes.

The ECP modes are supported by a 16 byte FIFO that may be accessed by programmed I/O or DMA cycles.

Key Features

IBM AT bus compatible.
Bi-directional port capability.
16 byte FIFO for ECP modes.
On-chip oscillator (ST78C36A, ST78C36CQ64).
Software selectable Interrupt (5, 7, or 9) and 8-bit DMA channel (ST78C36CQ64) FIGURE 1. ST78C36/36A BLOCK.

More Datasheets from Exar (now MaxLinear)

Part Number	Description
ST78C36A	ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO
ST78C34	GENERAL PURPOSE PARALLEL PRINTER PORT WITH 83 BYTE FIFO