FT232HP
features
:
- - Supports PD Specification 3.0.
- -
2 USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink
- mode with charging function through to Port 1 (FT233HPQ and FT233HPL only).
- -
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
- - Type-C/PD Physical Layer Protocol.
- - PD policy engine using 32-bit RISC controller with
8k B data RAM and 48k B code ROM.
- - PD mode configuration through external EEPROM.
- Options to use external MCU controlling PD policy through I2C interface.
- - Up to 8 Configurable PD GPIO pins support.
- External MCU support through I2C bus.
- - External EEPROM support for USB device
- configuration and PD profile.
- - Single channel USB to serial / parallel ports with a variety of configurations.
- - Entire USB protocol handled on the chip. No USB specific firmware programming required.
- - USB 2.0 Hi-Speed (480Mbits/Second) and Full
Speed (12Mbits/Second)...
