* ng resistor value should be determined considering the over-current protection threshold and the pulse-by-pulse current limit threshold, as shown in Figure 5. The peak value of current sensing voltage (VCS) should be lower than the pulse-by-pulse current limit level for peak load condition. It shoul
AN-6747B Datasheet (444.73 KB)
AN-6747B
Fairchild Semiconductor
444.73 KB
Flyback power supply.
www.fairchildsemi.com AN-6747 Applying FAN6747 to Control a Flyback Power Supply with Peak Current Output 1. Introduction Highly integrated PWM contr.
📁 Related Datasheet
AN-6003 Shoot-through (Fairchild Semiconductor)
AN-6961 Critical Conduction Mode PFC Controller (Fairchild Semiconductor)
AN-0001 Surface Mount Assembly (ANADIGICS)
AN-0002 Biasing Circuits and Considerations (ANADIGICS)
AN-0003 Thermal Considerations (ANADIGICS)
AN-0004 12mm Tape (ANADIGICS)
AN-1090 Controller Dynamics/Tuning (International Rectifier)
AN-136 A NEW GENERATION (Integrated Device Technology)
AN-1434 Crest Factor Invariant RF Power Detector (National Semiconductor)
AN-203 I/O Expansion (ZBasic)
