October 2014
FNA22512A
1200 V Motion SPM® 2 Series
Features
• UL Certified No. E209204 (UL1557)
• 1200 V - 25 A 3-Phase IGBT Inverter, Including
Control ICs for Gate Drive and Protections
• Low-Loss, Short-Circuit-Rated IGBTs
• Very Low Thermal Resistance Using Al2O3 DBC
Substrate
• Built-In Bootstrap Diodes and Dedicated Vs Pins
Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply Supported
• Built-In NTC Thermistor for Temperature Monitoring
and Management
• Adjustable Over-Current Protection via Integrated
Sense-IGBTs
• Isolation Rating of 2500 Vrms / 1 min.
General Description
The FNA22512A is a Motion SPM® 2 module providing a
fully-featured, high-performance inverter output stage for
AC induction, BLDC, and PMSM motors. These modules
integrate optimized gate drive of the built-in IGBTs to
minimize EMI and losses, while also providing multiple
on-module protection features: under-voltage lockouts,
over-current shutdown, temperature sensing, and fault
reporting. The built-in, high-speed HVIC requires only a
single supply voltage and translates the incoming logic-
level gate inputs to high-voltage, high-current drive
signals to properly drive the module's internal IGBTs.
Separate negative IGBT terminals are available for each
phase to support the widest variety of control algorithms.
Applications
• Motion Control - Industrial Motor (AC 400 V Class)
Related Resources
• AN-9075 - Users Guide for 1200V SPM® 2 Series
• AN-9076 - Mounting Guide for New SPM® 2 Package
• AN-9079 - Thermal Performance of 1200V Motion
SPM® 2 Series by Mounting Torque
Figure 1. Package Overview
Package Marking and Ordering Information
Device
FNA22512A
Device Marking
FNA22512A
Package
SPMCA-A34
Packing Type
Rail
Quantity
6
©2014 Fairchild Semiconductor Corporation
FNA22512A Rev. C0
1
www.fairchildsemi.com
