FSAM30SH60A Datasheet | Fairchild Semiconductor

Features - UL Certified No. E209204 (UL1557) - 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection - Low-Loss, Short-Circuit Rated IGBTs - Low Thermal Resistance Using Ceramic Substrate - Separate Open-Emitter Pins from Low Side IGBTs for Three-Phase Current Sensing - Single-Grounded Power Supply - Optimized for 15 k Hz Switching Frequency - Built-in NTC Thermistor for Temperature Monitoring - Inverter Power Rating of 2.4 k W / 100~253 VAC - Adjustable Current Protection Level via Selection of Sense-IGBT Emitter's External Rs - Isolation Rating: 2500 Vrms / min. January 2014 General Description FSAM30SH60A is a Motion SPM® 2 module providing a fully-featured, high-performance inverter stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, overcurrent shutdown, thermal monitoring, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the ining logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Applications - Motion Control - Home Appliance / Industrial Motor Resource - AN-9043 - Motion SPM® 2 Series User's Guide Figure 1. Package Overview Package Marking and Ordering Information Device Device Marking Package S32AA-032 Packing Type Rail Quantity ©2003 Fairchild Semiconductor Corporation FSAM30SH60A Rev. C8 .fairchildsemi. FSAM30SH60A Motion SPM® 2...