Datasheet4U Logo Datasheet4U.com

FSUSB22 - Low-Power 2-Port High-Speed USB2.0 Switch

Description

FSUSB22 is a low-power, high-bandwidth switch specially designed for applications switching high-speed USB 2.0 signals in handset and consumer applications; such as cell phone, digital camera, and notebook with hubs or controllers of limited USB I/O.

Features

  • -40dB Off Isolation at 250MHz.
  • -40dB Non-adjacent Channel Crosstalk at 250MHz.
  • On Resistance: 4.5Ω Typical (RON).
  • -3dB Bandwidth: 750MHz.
  • Low-Power Consumption: 1µA Maximum.
  • Control Input: TTL Compatible.
  • Bi-directional Operation.
  • USB High-Speed and Full-Speed Signaling Capability.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FSUSB242UCX-Z002 Type-C USB Port Protection Switch ON Semiconductor
FSUSB104 Low-Power Two-Port Hi-Speed USB2.0 Switch ON Semiconductor
FSUSB42 USB2.0 UART Switch ON Semiconductor
FSUSB43 USB2.0 Switch ON Semiconductor
FSUSB63 3:1 High-Speed USB2.0 Switch/Multiplexer ON Semiconductor

Other Datasheets by Fairchild (onsemi)

Part Number Description
FSUSB20 Low-Power 1-Port High-Speed USB Switch
FSUSB23 Low Power Hi-Speed USB 2.0 (480Mbps) Switch
FSUSB11 Low-Power Full-Speed Switch
FSUSB30 Low-Power 2-Port Hi-Speed USB2.0 Switch
FSUSB31 Low-Power 1-Port Hi-Speed USB2.0 Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch March 2008 FSUSB22 — Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Features ƒ -40dB Off Isolation at 250MHz ƒ -40dB Non-adjacent Channel Crosstalk at 250MHz ƒ On Resistance: 4.5Ω Typical (RON) ƒ -3dB Bandwidth: 750MHz ƒ Low-Power Consumption: 1µA Maximum ƒ Control Input: TTL Compatible ƒ Bi-directional Operation ƒ USB High-Speed and Full-Speed Signaling Capability Description FSUSB22 is a low-power, high-bandwidth switch specially designed for applications switching high-speed USB 2.0 signals in handset and consumer applications; such as cell phone, digital camera, and notebook with hubs or controllers of limited USB I/O. The wide bandwidth (750MHz) allows signals to pass with minimum edge and phase distortion.
Published: |