Datasheet4U Logo Datasheet4U.com

FXMAR2104 - 4-Bit Voltage Translator / Isolator

General Description

The FXMAR2104 is a 4-bit high-performance, configurable dual-voltage supply, open-drain translator for bi-directional voltage translation over a wide range of input and output voltages levels.

The FXMAR2104 also works in a push-pull environment.

Key Features

  • Bi-Directional Interface between Any Two Levels: 1.65V to 5.5V.
  • Direction Control Not Needed.
  • Internal 10KΩ Pull-Up Resistors.
  • System GPIO Resources Not Required when OE Tied to VCCA.
  • I2C-Bus® Isolation.
  • A/B Port VOL = 175mV (Typical), VIL = 150mV, IOL = 6mA.
  • Open-Drain Inputs / Outputs.
  • Works in a Push-Pull Environment.
  • Accommodates Standard-Mode and Fast-Mode I2C-Bus Devices.
  • Supports I2C Clock Stretching & Multi-Master.
  • Fully Configurabl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXMAR2102 2-Bit Voltage Translator / Isolator onsemi
FXMA2102 2-Bit VoltageTranslator / Buffer / Repeater / Isolator ON Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FXMAR2102 2-Bit Voltage Translator / Isolator
FXMA108 8-Bit Signal Translator
FXMA2102 2-Bit Voltage Translator / Buffer / Repeater / Isolator
FXMA2104 4-Bit Voltage Translator / Buffer / Repeater / Isolator
FXM2IC102 Dual Supply 2-Bit I2C Interface Voltage Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FXMAR2104 — Dual-Supply, 4-Bit Voltage Translator / Isolator for Open-Drain and Push-Pull Applications July 2012 FXMAR2104 Dual-Supply, 4-Bit Voltage Translator / Isolator for Open-Drain and Push-Pull Applications Features  Bi-Directional Interface between Any Two Levels: 1.65V to 5.