SG6518 Datasheet | Fairchild Semiconductor

atures - - - - - - - - - Two Adjustable Voltage Sense Input Pins: VSV1 and VSV2 Over-voltage Protection (OVP) for 5V, 12V, and two outputs: V1, V2 Over-current Protection (OCP) for 5V, 12V, and two outputs: V1, V2 Adjustable Voltage Control Sense Input of V1 and V2 (ADJ-V1, ADJ-V2) Open-drain Output for FPO Pin 13ms PSON Control Delay No Lockup During the Fast AC Power-on/off Wide Supply Voltage Range: 4V to 15V Programmable Over-temperature Protection (OTP) Description SG6518 provides the over-voltage protection (OVP) for 5V, 12V, and outputs V1 and V2 as well as over-current protection (OVP) for 5V, 12V, and outputs V1 and V2. When the voltage of OTP pin decreases to 1.2V, the over-temperature protection (OTP) function is enabled. FPO is set to HIGH to turn off the PWM control IC. The voltage difference across the external current shunt is used for OCP functions. An external resistor can be used to adjust protection threshold. The power supply is turned on after a 13ms delay time when the PSON signal is set from LOW to HIGH. To turn off the power supply, PSON signal is set from HIGH to LOW with the delay time 13ms. Applications - LCD Power Supply Ordering Information Part Number SG6518DZ SG6518SZ Operating Temperature Range -40°C to +85°C -40°C to +85°C Package 16-DIP 16-SOP Packing Method Rail Reel & Tape All packages are lead free per JEDEC: J-STD-020B standard. © 2007 Fairchild Semiconductor Corporation SG6518 - Rev. 1.0.0 .fairchildsemi. Free Datasheet http://../ - LCD Power Supply Supervisor Application Diagram Figure 1. Typical Application Note: 1. R1 = 200Ω and R2 = 200Ω are suggested. 2. C1 and C2 are suggested to be 100n F to 2.2u F. Internal Block Diagram Figure 2. Function Block Diagram Note: 3. The VSV1 pin is the power pin for the two OCP parators. © 2007 Fairchild Semiconductor Corporation...