FD168Y/FD168H is a Hall sensor with latched digital output.
It’s suitable for electronic commutation of brushless DC motor applications.
The FD168Y/FD168H uses a chopper amplifier for magnetic signal amplification, which can achieve a low offset and thus precise magnetic switching threshold.
Key Features
Open-drain pre-driver 50mA maximum sink output current Precise magnetic switching thresholds Available in SOT-23 and SIP-3L packages
FD168Y FD168H
Halogen Free
General.
Full PDF Text Transcription for FD168Y (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
FD168Y. For precise diagrams, tables, and layout, please refer to the original PDF.
FEELING TECHNOLOGY Single Digital Output Hall Effect Latch Features Open-drain pre-driver 50mA maximum sink output current Precise magnetic switching thresholds Available...
View more extracted text
um sink output current Precise magnetic switching thresholds Available in SOT-23 and SIP-3L packages FD168Y FD168H Halogen Free General Description FD168Y/FD168H is a Hall sensor with latched digital output. It’s suitable for electronic commutation of brushless DC motor applications. The FD168Y/FD168H uses a chopper amplifier for magnetic signal amplification, which can achieve a low offset and thus precise magnetic switching threshold. The output of NO pin is active low or high depends on flux density of the external magnetic source which is larger than threshold of BOP or BRP.
FD168Y Datasheet
