Axial Leaded Transient Voltage Suppressor
3KP SERIES
Formosa MS
3000W Axial Leaded Transient Voltage
Suppressors - 5.0V-220V
Features
• Axial lead type devices for through hole design.
• 3kW peak pulse power capability with a 10/1000us
waveform, repetition rate (duty cycle): 0.01%.
• Excellent clamping capability.
• Low incremental surge resistance.
• Fast response time from 0V to V ,BR typically less than
1 ps for uni-directional & 5 ns for bi-directional types.
• Glass passivated chip junction.
• Lead-free parts meet environmental standards of
MIL-STD-19500 /228
• Suffix "-H" indicates Halogen-free part, ex.3KP5.0A-H.
Mechanical data
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, P600
• Lead : Axial leads, solderable per MIL-STD-202,
Method 208 guaranteed
• Polarity: Color band denotes cathode end
• Mounting Position : Any
• Weight : Approximated 2.10 gram
Package outline
P600
.360(9.10)
.340(8.60)
1.0(25.4)
MIN.
.360(9.10)
.340(8.60)
.052(1.32)
.048(1.22)
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
Maximum ratings (AT TA=25oC unless otherwise noted)
PARAMETER
CONDITIONS
Peak power dissipation
with a 10/1000us waveform, Note 1 & Fig. 1
Peak pulse current
with a 10/1000us waveform
Steady state power dissipation
Peak forward surge current
Maximum instantaneours forward voltage
at TL=75°C lead length 0.375” (9.5 mm)
8.3mS single half sine-wave
(JEDEC Method), note 2
at 100A for uni-directional types only, note 3
Operating junction temperature range
Storage temperature range
Note 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25OC per Fig. 2
2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
3. VF<3.5V. for devices of VBR <= 220V, and VF<5.0V. for devices of V >BR =201V
Symbol 3KP SERIES UNIT
PPPM
IPPM
P M ( AV )
3000
See table 1
6.5
W
A
W
IFSM 300 A
VF
3.5 / 5.0
V
TJ -55to+150 OC
TSTG
-55to+150 OC
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 2
Document ID
DS-222822
Issued Date
2009/08/10
Revised Date
2010/03/10
Revision
B
Page.
8
