FA1210 Overview
Power ground and thermal dissipation pad, this pin must be connected together with VSS and ground on board. Truth Table VTH H_INN H Low L High H L -H -L H_INP L H L H L H MOTU H L OFF L - MOTV L H L OFF - FG OFF L OFF L L L FA1210 Mode Rotation-driver Rotation-regeneration Lock protection Ratings Stresses exceeding the ratings may damage the device. The device may not function or be operable about the remended...
FA1210 Key Features
- Speed Control by analog voltage
- Soft-Start circuit
- FG output signal
- Built-in Hall bias circuit
- Minimum speed setting
- Soft switch for quiet drive
- Advanced CMOS process and low Rds
- Built-in triangular wave generator, No capacitor
- Built-in lock protection and automatic recovery
- Built-in thermal shutdown protection(TSD)