F4500 Datasheet | Fox Electronics

FEATURES - 1.8V Operation - - - - - HCMOS Output Low Power Consumption Standby Function Tape and Reel (2,000 pcs. STD) Pb Free - MODEL NUMBER SELECTION Model Number F4500 F4500R F4505 F4505R F4506 F4506R F4508 Frequency Stability 1 ±100PPM ±100PPM ±50PPM ±50PPM ±25PPM ±25PPM ±20PPM Operating Temperature (ºC) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 1.800 ~ 70.000 1.800 ~ 70.000 1.800 ~ 70.000 1.800 ~ 70.000 1.800 ~ 70.000 1.800 ~ 70.000 1.800 ~ 70.000 - ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO ) Storage Temperature Range (TSTG) Supply Voltage (VDD ) Input Current (I DD ) 1.000 ~ 32.100 MHz 32.100+ ~ 70.000 MHz Output Symmetry (50% V DD) Rise Time (20% ~ 80% VDD) (TR) 1.800 ~ 32.100 MHz 32.100+ ~ 70.000 MHz Fall Time (80% ~ 20% VDD) (TF) 1.800 ~ 32.100 MHz 32.100+ ~ 70.000 MHz Output Voltage (VOL) (VOH ) Output Current (I OL) (I OH ) Output Load (HCMOS) Standby Current Start-up Time (TS) Output Disable Time 2 Output Enable Time 2 MAX (unless otherwise noted) 1.800 ~ 70.000 MHz -55ºC ~ +125ºC 1.8V ± 5% 7m A 15m A 40% ~ 60% 5n S 3.5n S 5n S 3.5n S 20% VDD 80% VDD Min 2m A Min 2m A Min 15p F 10µA 10m S 300n S 10m S Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. See page 30 for mechanical specifications, test circuits, and output waveform. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. All specifications subject to change without notice. Rev. 07/9/03 All dimensions are in millimeters. - ENABLE / DISABLE FUNCTION INH (Pin 1) OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level VIH ≥ 70% VDD ACTIVE '0' Level VIL ≤ 30% VDD High Z See page 60 for tape and reel specifications. FOX Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +001(239)693-0099 FAX +001(239)693-155...