Download the 56F8037 datasheet PDF.
This datasheet also covers the 56F8027 variant, as both devices belong to the same 16-bit digital signal controllers family and are provided as variant models within a single manufacturer datasheet.
General Description
of the TMS signal in Table 2-3: Note: Always tie the TMS pin to VDD through a 2.2K resistor.
Changed the description of the GPIOC4 signal in Table 2-3 (was “the signal goes to both the ANA0 and CMPAI3”, is “the signal goes to both ANB0 and CMPB13”).
Rev.
Changed the ITCN_BASE a
Key Features
Added information for 56F8027 device throughout document.
Note: The manufacturer provides a single datasheet file (56F8027_FreescaleSemiconductor.pdf) that lists specifications for multiple related part numbers.
Full PDF Text Transcription for 56F8037 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
56F8037. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com 56F8037/56F8027 Data Sheet Technical Data 56F8000 16-bit Digital Signal Controllers MC56F8037 Rev. 6 02/2010 freescale.com www.DataSheet4U.com Documen...
View more extracted text
ers MC56F8037 Rev. 6 02/2010 freescale.com www.DataSheet4U.com Document Revision History Version History Rev. 0 Rev. 1 Initial public release. • In Table 10-4, added an entry for flash data retention with less than 100 program/erase cycles (minimum 20 years). • In Table 10-6, changed the device clock speed in STOP mode from 8MHz to 4MHz. • In Table 10-12, changed the typical relaxation oscillator output frequency in Standby mode from 400kHz to 200kHz. • Changed input propagation delay values in Table 10-21 as follows: Old values: 1 μs typical, 2 μs maximum New values: 35 ns typical, 45 ns maximum Rev. 2 Rev.
More Datasheets from Freescale Semiconductor (now NXP Semiconductors)
56F8037 Datasheet
