Datasheet4U Logo Datasheet4U.com

MC10XS3535 - Smart Front Corner Light Switch

Datasheet Summary

Description

of each pin can be found in the Functional Pin Description section beginning on Page 20.

Features

  • Triple 10 mΩ and dual 35 mΩ high side switches.
  • 16-bit SPI communication interface with daisy chain capability.
  • Current sense output with SPI-programmable multiplex switch and board temperature feedback.
  • Digital diagnosis feature.
  • PWM module with multiphase feature including prescaler.
  • LEDs control including accurate current sensing and low dutycycle capability.
  • Fully protected switches.
  • Over-current shutdown detection.

📥 Download Datasheet

Datasheet preview – MC10XS3535

Datasheet Details

Part number MC10XS3535
Manufacturer Freescale Semiconductor
File Size 2.05 MB
Description Smart Front Corner Light Switch
Datasheet download datasheet MC10XS3535 Datasheet
Additional preview pages of the MC10XS3535 datasheet.

📁 Similar Datasheet

  • MC10XS4200 - Dual 24V 10mOhm high-side switch (NXP)
  • MC1001 - (MC1002 / MC1003) 6 input Gates (Motorola)
  • MC1002 - 6 SEGMENT x 7 GRID LED Driver (ABOV)
  • MC100E016 - 8-BIT SYNCHRONOUS BINARY UP COUNTER (ON Semiconductor)
  • MC100E016 - 8-Bit Synchronous Binary Up Counter (Motorola)
  • MC100E101 - QUAD 4-INPUT OR/NOR GATE (ON Semiconductor)
  • MC100E101 - Quad 4-Input OR/NOR Gate (Motorola)
  • MC100E104 - QUINT 2-INPUT AND/NAND GATE (ON Semiconductor)
  • MC100E104 - QUINT 2-INPUT AND/NAND GATE (Motorola)
  • MC100E107 - QUINT 2-INPUT XOR/XNOR GATE (ON Semiconductor)
Other Datasheets by Freescale Semiconductor

Full PDF Text Transcription

Click to expand full text
Freescale Semiconductor Technical Data Document Number: MC10XS3535 Rev. 6.0, 6/2012 Smart Front Corner Light Switch (Triple 10 mOhm and Dual 35 mOhm) The 10XS3535 is designed for low voltage automotive and industrial lighting applications. Its five low RDS(ON) MOSFETs (three 10 mΩ, two 35 mΩ) can control the high sides of five separate resistive loads (bulbs, Xenon-HID modules and LEDs). Programming, control and diagnostics are accomplished using a 16-bit SPI interface (3.3 V or 5.0 V). Each output has its own pulsewidth modulation (PWM) control via the SPI. The 10XS3535 has highly sophisticated failure mode handling to provide high availability of the outputs. Its multiphase control and output edge shaping improves electromagnetic compatibility (EMC) behavior.
Published: |