MC10XSD200 Datasheet | Freescale Semiconductor

Freescale Semiconductor Advance Information Document Number: MC10XSD200 Rev. 2.0, 9/2013 Dual 10 m Ohm High Side Switch The 10XSD200 device is part of a 36 V dual high side switch product family with integrated control, and a high number of protective and diagnostic functions. It has been designed for industrial applications. The low RDS(ON) channels (<10 m) can control different load types; bulbs, solenoids, or DC motors. Control, device configuration, and diagnostics are performed through a 16-bit serial peripheral interface (SPI), allowing easy integration into existing applications. This device is powered by SMARTMOS technology. Both channels can be controlled individually by external or internal clock signals, or by direct inputs. Using the internal clock allows fully autonomous device operation. Programmable output voltage slewrates (individually programmable) helps improve electromagnetic patability (EMC) performance. To avoid shutting off the device upon inrush current, while still being able to closely track the load current, a dynamic overcurrent threshold profile is featured. Switching current of each channel can be sensed with a programmable sensing ratio. Whenever munication with the external microcontroller is lost, the device enters a Fail-safe operation mode, but remains operational, controllable, and protected. Features - - - - - - Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V Two fully protected 10 m (@ 25 °C) high side switches Up to 6.0 A steady state current per channel Separate bulb and DC motor latched overcurrent handling Individually programmable internal/external PWM clock signals Overcurrent, short-circuit, and overtemperature protection with programmable autoretry functions - Accurate temperature and current sensing - Open Load detection (channel in OFF and ON state), also for LED applications (7.0 m A typ.) - 3.3 V and 5.0 V patible 16-bit SPI port for device control,  configuration and diagnostics at rates...