Datasheet4U Logo Datasheet4U.com

MC34017A - Telephone Tone Ringer Bipolar Linear/I2L

Datasheet Summary

Features

  • Complete Telephone Bell Replacement Circuit with Minimum External Components.
  • On-Chip Diode Bridge and Transient Protection.
  • Direct Drive for Piezoelectric Transducers.
  • Push Pull Output Stage for Greater Output Power Capability.
  • Base Frequency Options.
  • 34017A-1: 1.0 kHz.
  • 34017A-2: 2.0 kHz.
  • 34017A-3: 500 Hz.
  • Input Impedance Signature Meets Bell and EIA Standards.
  • Rejects Rotary Dial Transient 34017A TELEPH.

📥 Download Datasheet

Datasheet preview – MC34017A

Datasheet Details

Part number MC34017A
Manufacturer Freescale Semiconductor
File Size 336.03 KB
Description Telephone Tone Ringer Bipolar Linear/I2L
Datasheet download datasheet MC34017A Datasheet
Additional preview pages of the MC34017A datasheet.

📁 Similar Datasheet

  • MC34017 - TELEPHONE TONE RINGER BIPOLAR LINEAR (Motorola)
  • MC3401 - Quad Operational Amplifiers (Motorola)
  • MC3401 - 16 SEGMENT X 12 GRID VFD DRIVER (ABOV)
  • MC34010 - ELECTRONIC TELEPHONE CIRCUIT (Motorola)
  • MC34012-1 - (MC34012-1/-2/-3) Telephone Tone Ringer (Motorola)
  • MC34012-2 - (MC34012-1/-2/-3) Telephone Tone Ringer (Motorola)
  • MC34012-3 - (MC34012-1/-2/-3) Telephone Tone Ringer (Motorola)
  • MC34014 - TELEPONE SPEECH NETWORK (Motorola)
  • MC34018 - VOICE SWITCHED SPEAKER-PHONE CIRCUIT (UTC)
  • MC34018 - VOICE SWITCHED SPEAKERPHONE CIRCUIT (Motorola)
Other Datasheets by Freescale Semiconductor
  • MC34652 - Negative Voltage Hot Swap Controller
  • MC34670 - IEEE 802.3af PD
  • MC34671 - High Input Voltage 600mA Charger
  • MC34701 - 1.5 A Switch-Mode Power Supply with Linear Regulator
  • MC34702 - Switch-Mode Power Supply
  • MC34703 - Switch-Mode Power Supply
  • MC34708 - Power Management
  • MC34712 - Fully Integrated DDR Switch-Mode Power Supply

Full PDF Text Transcription

Click to expand full text
Freescale Semiconductor Technical Data MC34017A Rev 3.0, 3/2006 Telephone Tone Ringer Bipolar Linear/I2L Features • Complete Telephone Bell Replacement Circuit with Minimum External Components • On-Chip Diode Bridge and Transient Protection • Direct Drive for Piezoelectric Transducers • Push Pull Output Stage for Greater Output Power Capability • Base Frequency Options • 34017A-1: 1.0 kHz • 34017A-2: 2.0 kHz • 34017A-3: 500 Hz • Input Impedance Signature Meets Bell and EIA Standards • Rejects Rotary Dial Transient 34017A TELEPHONE TONE RINGER BIPOLAR LINEAR/I2 D SUFFIX 98A42564B 8-LEAD SOIC P SUFFIX 98A42420B 8-LEAD DIP ORDERING INFORMATION Device MC34017AD/DR2 MC34017AP www.DataSheet4U.
Published: |