Datasheet4U Logo Datasheet4U.com

MPC18730 - Power Management IC

General Description

of each pin can be found in the Functional Pin Description section beginning on page 14.

Key Features

  • Operates from single cell Li-Ion, Ni-MH, or Alkaline 2 DC-DC Converters 3 Low Drop Regulators Serial Interface Sets Output Voltages 4 Wake Inputs Low Current Standby Mode Pb-Free Packaging Designated by Suffix Code EP VB VBATT VO VREF PGOOD1 VGATE_EXT VO 18730 POWER.

📥 Download Datasheet

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
MPC18730EP Power Management IC
MPC18730EP-R2 Power Management IC
MPC17517 1.0 A 6.8 V Dual Motor Driver
MPC17C724 0.4A Dual H-Bridge Motor Driver
MPC509 32-Bit Microcontroller Reference Manual
MPC509RM 32-Bit Microcontroller Reference Manual
MPC5125 Microcontroller
MPC5200 Microprocessor
MPC5200B SDRAM/DDR Memory Controller
MPC555 Microcontroller USER MANUAL

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Freescale Semiconductor Advance Information Document Number: MPC18730 Rev. 4.0, 8/2006 Power Management IC with Five Regulated Outputs Programmed Through 3-Wire Serial Interface The MPC18730 Power Management IC (PMIC) regulates five independent output voltages from either a single cell Li-Ion (2.7 V to 4.2 V input range) or from a single cell Ni-MH or dry cell (0.9 V to 2.2 V input range). The PMIC includes 2 DC-DC converters and 3 low drop out (LDO) linear regulators. The output voltage for each of the 5 output voltages is set independently through a 3-wire serial interface.