3KP_SERIES SPECIFICATION
Rev. A
3000W AXIAL LEADED TRANSIENT VOLTAGE SUPPRESSORS, 5.0V – 220V
PRODUCT FEATURES
1. FLAMMABILITY CLASSIFICATION 94V-0
2. GLASS PASSIVATED CHIP JUNCTION
3. 3KW PEAK PULSE POWER CAPABILITY WITH A 10/1000 µS
WAVEFORM, REPETITION RATE (DUTY CYCLE): 0.01%.
4. EXCELLENT CLAMPING CAPABILITY
5. FAST RESPONSE TIME FROM 0V TO VBR, TYPICALLY <1 pS
FOR UNI-DIRECTIONAL & <5 nS FOR BI-DIRECTIONAL
6. POLARITY: INDICATED BY CATHODE BAND
7. MOLDED PLASTIC CASE P600
8. DIMENSIONS IN INCHES AND (MILLIMETERS)
9. LEADS: SOLDERABILITY PER MIL-STD-202 METHOD 208
10. WEIGHT: 2.10 GRAMS
11. RoHS COMPLIANT. ADD SUFFIX “-H” FOR HALOGEN
FREE PART. i.e. 3KP5.0A-H.
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS (TA =25°C UNLESS OTHERWISE NOTED)
PARAMETER
PEAK POWER DISSIPATION
PEAK PULSE CURRENT
STEADY STATE POWER DISSIPATION
PEAK FORWARD SURGE CURRENT
MAXIMUM INSTANTANEOUS FORWARD
VOLTAGE
OPERATING JUNCTION TEMPERATURE
RANGE
STORAGE TEMPERATURE RANGE
CONDITIONS
WITH A 10/1000 µS WAVEFORM, SEE NOTE 1 & FIG.1
WITH A 10/1000 µS WAVEFORM, SEE NOTE 1 & FIG.1
SYMBOL
PPPM
IPPM
AT TL=75° C, LEAD LENGTH 0.375” (9.5mm)
8.3mS SINGLE HALF SINE-WAVE
(JEDEC METHOD), SEE NOTE 2
AT 100A FOR UNI-DIRECTIONAL TYPES ONLY, SEE
NOTE 3
P M( AV)
IFSM
VF
TJ
TSTG
3000
SEE TABLE
6.5
300
3.5/5.0
-55 TO +150
-55 TO +150
UNIT
W
A
W
A
V
OC
OC
Note：1. Non-repetitive current pulse, per fig. 3 and derated above TA=25°C per fig. 2
2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
3. VF<3.5V for device with VBR≤200V and VF<5.0V for device with VBR>200V
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 1 of 4
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
