Datasheet4U Logo Datasheet4U.com

MB88111 - A/D Converter

Description

The MB88111 is an analog-to-digital converter that converts its analog input to a 10-bit digital value and outputs it as serial data.

The MB88111 employs a successive approximation method for A/D conversion.

Features

  • 24-channel analog input RC-type successive approximation system with a sample-and-hole circuit 10-bit resolution Conversion speed within 50 µs (at a system clock rate of 1 MHz) Digitally converted data output from the MSB Digitally converted data output as 16-bit serial data Clock-synchronous serial transfer system Internal extended serial interface Capable.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MB88 Single Phase Bridge Rectifier Micro Commercial Components
MB8821x CMOS Single-Chip 4-Bit Microcomputer with A/D Converter Fujitsu
MB88301A NMOS 1 Channel / 13 Bit and 3 Channel / 6 Bit D/A Converter Fujitsu
MB88303 NMOS Television Display Controller Fujitsu
MB88304 NMOS Input / Output Expander Fujitsu

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MB88101A A/D Converter
MB88141 A/D Converter
MB88141A A/D Converter
MB88146A D/A Converter
MB88151 Spread Spectrum Clock Generator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS04-13106-2E Linear IC Converter CMOS A/D Converter (With 24-Channel Input at 10-bit Resolution) MB88111 s DESCRIPTION The MB88111 is an analog-to-digital converter that converts its analog input to a 10-bit digital value and outputs it as serial data. The MB88111 employs a successive approximation method for A/D conversion. It has 24 input channels to be A/ D converted selectively by setting in an internal register. Since the MB88111 can input and output 16-bit serial data in synchronization with the clock, it can be easily connected to the serial I/O port in a 16-bit microcontroller.
Published: |