MBM29DL34TF - (MBM29DL34BF/TF) FLASH MEMORY CMOS 32 M (4 M X 8/2 M X 16) BIT
Fujitsu Semiconductor Limited
Download the MBM29DL34TF datasheet PDF.
This datasheet also covers the MBM29DL34BF variant, as both devices belong to the same (mbm29dl34bf/tf) flash memory cmos 32 m (4 m x 8/2 m x 16) bit family and are provided as variant models within a single manufacturer datasheet.
General Description
The MBM29DL34TF/BF are a 32 M-bit, 3.0 V-only Flash memory organized as 4 M bytes of 8 bits each or 2 M words of 16 bits each.
These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply.
12.0 V VPP and 5.0 V VCC are not required for write or erase operations.
Key Features
a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The device is erased when shipped from the factory. The device features single 3.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Data Pollin.
Note: The manufacturer provides a single datasheet file (MBM29DL34BF_FujitsuMediaDevices.pdf) that lists specifications for multiple related part numbers.
Full PDF Text Transcription for MBM29DL34TF (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
MBM29DL34TF. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20908-2E FLASH MEMORY CMOS 32 M (4 M × 8/2 M × 16) BIT Dual Operation MBM29DL34TF/BF 70 s DESCRIPTION The MBM29D...
View more extracted text
M × 16) BIT Dual Operation MBM29DL34TF/BF 70 s DESCRIPTION The MBM29DL34TF/BF are a 32 M-bit, 3.0 V-only Flash memory organized as 4 M bytes of 8 bits each or 2 M words of 16 bits each. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The devices can also be reprogrammed in standard EPROM programmers. (Continued) s PRODUCT LINE UP Part No. Power Supply Voltage (V) Max Address Access Time (ns) Max CE Access Time (ns) Max OE Access Time (ns) MBM29DL34TF/BF 70 2.7 V to 3.
More Datasheets from Fujitsu Semiconductor Limited
MBM29DL34TF Datasheet
